Anyone know where I can find a cap for the trim pump reservoir? This is what my pump looks like. I think I need a new cap because when I run the drive up and down it is leaking through the pin hole in the cap.
I understand that but isn't there supposed to be a diaphram under the cap to keep condensation from entering the reservoir? I have read a few threads where people had mentioned it was supposed to be there and it looks as if the PO had lost the original cap and just used a generic cap and poked a hole in it. I also suspect that the reservoir is overfilled as well due to his poor maintenance.
How hard did you look? I found it in 38 seconds.
When you fill the drive resivoir the drive needs to be fully down and only fill it to the mark embossed on the resivoir.
How hard did you look? I found it in 38 seconds.
When you fill the drive resivoir the drive needs to be fully down and only fill it to the mark embossed on the resivoir.
Like I said I searched for a while....... Wasn't aware of mercruiserpats.com and now that I know I will have another option for searching parts. Thanks Hava and Bomar.
