REEL-BREAK
Seaman Apprentice
- Joined
- Jun 4, 2001
- Messages
- 46
my motor wasnt working I took the plug lose and had volts at yellow-blk 12vdc red- blk other switch position 12vdc so I took blue cover off went in the motor and the brushes were stuck and replaced now the motor runs both directions but tabs not moving coupling good to pump.I unwired the motor so I could test solenoids they do click each one.I did change the trim oil I had red oil but a freind sold me clear regular trim oil is this a possible problem.Ive taken this thing off 4 times now any advice would be greatly appreciated.Please dont tell me take to the shop as the other board did I think its air locked or something. 