FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
hi all
can someone advise me where to wire the volt meter to??? does it connect straight on the battery or through the engine
thanks in advance
115hp 1982 blueband 6cyl
On the frount of your control box there is a plug in for a tach, use a voltmeter and will find a + and - plug the positive turns on and off with the ign switch thats where I hook them up
There is a far easier place to connect the voltmeter. Every one of your other gauges except the speedometer and water pressure (if you have one)has a POS and NEG terminal on it. The gauges get power only when the key is on. Connect the POS and NEG terminal on the voltmeter to the POS and NEG terminal on any of those gauges.
