Hi Bill here again., On my 1982 140 johnson I have changed the water pump and houseing & thermosats seems to cool pretty good my question is under the rear cowling their are two exhaust ports I only seem to be getting water exiting from one side (opp. starter side of motor) I have changed the hoses from the thermostat to the cyl heads even took them off while running plenty of water comeing from both and tell tale has a heavy steam.. I can touch the heads after running for 5 min. I did not put a hose to water intake when lower unit was off , did not know about it ,new to boating . I have not run this in water yet only on the muff`s. Does this mean I should drop lower unit again and try to flush out through water tube or am I o.k. This motor sat for a couple of years.. Any advice or help would really be appreciated Thanks BIll 