water pump

[melapatt1973]

I replaced my water pump on a 1998 60hp elpto 2 stroke and I have some water coming from pee hole but there is also water coming out on the back side by the 2 braces there is a little hole

 

[melapatt1973]

I replaced my water pump on a 1998 60hp elpto 2 stroke and I have some water coming from pee hole but there is also water coming out on the back side by the 2 braces there is a little hole

I would say its about mid ways on back side of unit water coming from another small hole that is right in front 2 braces on unit

 

[melapatt1973]

I have a 1998 60 hp 2 cycle 3cylinder outboard and I put in a new water pump and I have water coming from the pee hole but not like super strong and about straight across to the back side of unit there is a small hole in the unit and it looks like where the arms connected to the unit to raise and lower it. But I have water that boils out of that hole as well its not strong but a good amount of water while idling

 

[Faztbullet]

did you put the slinger on top of water pump housing?

 

[melapatt1973]

I have replaced my water pump and I have low pressure and I have water coming from a small hole where the motor brace attached to the mid part of the motor. I have taken it apart 3 times and I am pretty sure I got the tube stabbed right. And does the impeller have spacers on each side of it?

 

[melapatt1973]

did you put the slinger on top of water pump housing?

What is a slinger? I put my tube it came with

 

[melapatt1973]

I called the marina and they said to make sure the tube is on the tube coming down from motor but I have did this 3 times now and I keep getting the same results. I also didn't have any little seals for each side of water pump and my kit didn't have any