Yeah I have a 12ft v hull. If I end up getting this motor I think I might put a new thicker transom in. From what I've seen online Horsepower Rating = length of boat x width of transom. . . . So putting a newer thicker transom in might boost the HP?
Transom thickness has nothing to do with HP rating.
Usually I don't see much issues with possible purchases with folks most of the time. But $450 dollars for a suspect engine that somebody actually tried to "hop up"? And for a little 9.9 HP or 15 HP (who really knows) worked on engine. That sounds more like a larger engine price in my opinion. All I can say is, let the buyer beware! It could be the greatest engine ever, but it could quit an hour later too. If we all knew that time frame it would be great. But nobody knows that time frame. So at best it is what it is... Would I buy it? Not for that price, but that IS just my opinion!
I think you guys are right. Unless he can do a full demo and I see that the engine runs fine for a few minutes with good water flow through the lower unit I'm probably going to run. I'm definitely going to check it out at least though. The guy only wants $150 for it. . . . obviously this is fishy, but its winter and the guy has a few outboards he's looking to sell quick.
I've learned a lot from taking advantage of "fishy deals" though. I picked up a 1.75 hp air cooled game fisher from a friend for free that had issues with the fuel line. I cleaned out the carb and checked the fuel line. Turns out it as an issue with the "fuel petcock bowl". The threads where stripped, so it was allowing air to get into the fuel line. Had a neighbor take a look at it, and he threw some sort of industrial glue on it. Purrs like a kitten now.
I ended up buying a 5 hp 53 seaking for $125 last summer after that. Most people told me to run from that too. All I had to do was hit it with starter fluid at the beginning of the day and I was good. Can't beat that. Just had to do was throw down $125 and I had something to use for the whole summer. I'm looking to upgrade to something bigger this year. For $150 I'd be willing to deal with issues. Even if I get one season out of it I'd be happy. Obviously trouble shooting with any sort of issues the engine will probably have will give me the experience I'm looking for too. I'm hesitant to buy a new 9.9 hp motor that'll cost me around $1500+ around here without actually knowing too much. Better to start with a cheap piece of crap and go from there right?
Still there's a point where it's foolish to invest in something that doesn't work at all. So I think you guys are right, I should def see that it at least turns over and the lower end isn't seized. I think I'm gonna insist on a demo before I buy.
Edit: So I took a look around, and apparently staring an outboard with starting fluid continuously is pretty bad for the motor because of the lack of lubrication. Good to know for my seaking! Still don't regret spending $125 for a motor that I got a full season out of. Definitely need to move onto something else at this point.
Do you guys have any suggestions for where to look other then craigslist for a quality 9.9 hp under $1000?
What is the problem with the older motor everyone?
Back to the original question, check compression, if its over 100 on both pots then grab it and learn to work on it.
You seem t place great reliance on "starter fluid" You should be aware that 2 stroke engines run on a gas/oil mixture usually 50/1 on the post 1961 models,which provides lubrication.When you use starter fluid there is no lubrication,furthermore the solvent washes down your cylinders and debases what oil there is in your bearings".But it's only for a few seconds" I hear yiu cry.Brlieve me, in those few seconds a lot of damage can be done. MESSAGE: Save the starter fluid for cleaning the garage floor and keep it away from you motor.If your motor needs a little encouragement,first get it tuned right then use a little fuel mixture in a spray bottle into the carb throat.. Good kuck.
In any case, I would buy a 3 gallon fuel tank with a hose and connector for whatever you're buying. ( you're gonna need it anyway) Put a gallon of fuel in it, mix in the oil, and go over and run whatever you decide on, shifting gears as well, these sellers realize people are going to do it, as well as check the compression. If you're thrilled buy it, if not get something else that runs better, or make a lowball offer if you want to work on it......