Had a little oil drip from the prop area on a M15a. Figured I need to replace the shaft oil seal. I drained the L/U oil, removed the prop, and then the two bolts holding the PSH in. But it wont budge.
I taped all around with hammer. After about 5 minutes I got agressive. I tried hammering a screw driver in the pry groves like a wedge and ended up breaking the housing face right off. But the shaft housing is still stuck. Is there some secret to getting this thing out?
I taped all around with hammer. After about 5 minutes I got agressive. I tried hammering a screw driver in the pry groves like a wedge and ended up breaking the housing face right off. But the shaft housing is still stuck. Is there some secret to getting this thing out?
Last edited: