81_chapparel194
Petty Officer 1st Class
- Joined
- Aug 7, 2012
- Messages
- 341
Re: where is this water coming from?!?!?
that 1/4 inch hole could let a lot of water in.... does it look like something gouged it or a factory hole? i would put the 3m 5200 sealant in it. (i think thats the correct # someone here will correct me if im wrong.) but at the rate you say the water is coming from that hole i would think it should have been coming out pretty rapid when u attatched the water hose to it. sounds like your on the right path..just got done going over the boat again (it's on the trailer)...
I ran water up the tube in question and it started filling up the ski well in the middle of the boat. However, it didnt start coming in from the front of the well, it started coming up in the corners at the rear of the well.
SO, if it is coming into the bilge from the ski-well, how is it getting into the ski-well to begin with?!?!?
There are several deep scratches on the bottom of the hull, but i pushed as hard as i could and the edges didnt move at all. There is one actual 1/4" hole in the hull at the center of the V where it begins curving back up to the bow, but i stuck a screwdriver in it and it's only about 1/4" deep. i cant see anything above the trailer bunks, so those parts of the hull will have to wait till i get it back in the water.
i've left some water in the ski-well to see if maybe it starts seeping out of the hull somwhere
i checked the transom again, i swear it is solid....but it's not leaking in from there anyway.