Which 2 terminals for jumping start?

[cheers731]

My 92 Four Winns with 5.8L OMC and Corbra OD has developed intermittent starting problem. On the cold start, it requires extra gas to start. However, with the warm-up button depressed, starter will not turn with either lever move forward or reverse. The starter will turn when lever is dead in center. I read Don's "Adult only" and there is a way to jump start from the slave solenoid if I am strangulated on the water. I looked at mine and this is the only solenoid I can find which is attached to the circuit braker box. Could someone kindly show me which 2 ends to connect for a jump start?
Thanks,

 

[Don S]

Re: Which 2 terminals for jumping start?

Using your picture, if the solenoid works, just jumper from 1 to 4.
If the solenoid doesn't work, you have to jump 1 to 3. Will take a big cable to jump it.
Your engine doesn't have a slave solenoid, only the one you pictured. There is no starter solenoid on your starter.

 

[cheers731]

Re: Which 2 terminals for jumping start?

Thank you so much, Don. Yes, there is no solenoid on the starter, only a hump on the back.