Latest activity

i'm a bayliner fan had a few. Biggest was the 34 avanti. 13 foot beam, awesome pig of a boat.

I did the same. Mine wasn't stuck just while it was out for the new floor i did it. Lots of gunk in there.

when the flock of birds hit the oak tree off the deck. THis morning was basically covered. Swept off, about the same right now

Thank ya sir

How to do a running test; be careful with the hose clamps watch out for leaks!

Lou-I deadheaded it. I see your image in the second post and that makes sense to me, so I’ll get the borrowed gauge back and hook it up...

You may have either a broken ot some weak valve springs. To replace them you will have to remove the manifolds. They are easy to...

It’s imperative that you pay close attention to the plywood edges. This is the problem with plywood. This is where water intrusion will...

The way the wires are crumbling as I remove them, including the wires coming from the stator, I plan on rebuilding the whole harness -...

When you do get it out make sure you wire brush the bejesus out of the inside of the tilt tube , flush it out and pack the grease into...

fuel lasts 6-12 months. Stabilizer at the most can extend that up to 6 months. if you have a floor to varnish, you have a tank full of it.

hl your are in the wrong forum. Go to Mercury/Mariner forum, the 150Hp Mercury 6 inline is a different animal than Force/Chrysler...

best sales people in my experience who worked for me over the years are people that do the work, know the work, believe in the work...

best sales people in my experience who worked for me over the years are people that do the work, know the work, believe in the work...

Remember, I'm just labor, not owner. I don't talk to customers much.