Thanks for the help.

[Saskatoon2005]

Re: Thanks for the help.

I wanna thank Paul Moir personally for taking the time to help with a used motor I purchased and was lost with. I had no idea what to look for and he helped me out alot....hats off to you Paul for answering my question quickly and acurately. You are a great guy.

 

[farginicehole]

Re: Thanks for the help.

I'd also like to thank Dhadley, OBJ, Joe Reeves, moderator1, the list goes on and on. I'd also like to personally apologize again to DHPMARINE and anybody else I offended last summer(?) with my comments about the "$tealer". . . . I am very frustrated every time I have to deal with a few specific salespeople at one particular large local dealership, so I (wrongly) was spouting off about it in one of my threads. I know that these individuals do not = all dealers, so I should have and will just keep my big, fat yapper shut about it from now on and just exercise my right to not give that dealership my business anymore.

 

[randycisme]

Re: Thanks for the help.

Joe Reeves and myoutboards get a big thank you for helping with my battery problem. Also I bought the rectifier that myoutboards suggested from radio shack part #276-1185 and it worked perfect and the cost was $3.29 instead of 40 bucks. Thanks again

 

[beau123]

Re: Thanks for the help.

This is the best forum I have ever been on, the expertiece here is uncontested. I'd like to thank,Dhadley, Basscat 1, Walleyehed, fishcakes, moderator1, Walker, Indymike, Solittle, DJ, Laddies, and myoutboards. If I forgot anyone you know who you are and I couldn't have fixed my problem with out any of you. I appeciate everyones information.<br />Thanks again,<br />hoss123

 

[vranasaurus]

Re: Thanks for the help.

I am now the proud owner of an OPERATIONAL 90 hp evinrude thanks in large part to the folks here on the board. <br /><br />I also now have a new found respect for outboard mechanics. <br /><br />This board and it's posters and experts has been an indespensible part of my engine rebuild.<br /><br />Thanks much.

 

[Scuda11]

Re: Thanks for the help.

This site is priceless. I learned more in about a month BEFORE I even registered, just reading the posts than I have ever learned. The people here have been outstanding. I know I will need more help and probably soon! I have allot more confidence now working on my engines though, thanks to iboats. I have referred many people here so you can blame me for the newbies.

 

[CER79]

Re: Thanks for the help.

Thanks to OBJ for all his help on my 15 hp Johnson problem . I be paddling a canoe if it was not for his sage advice<br /><br />cer79

 

[REELSPORT]

Re: Thanks for the help.

I would like to add my thanks to all the members who have helped me and to all the ones who have made posts. I have learned more than I ever thought I wanted to know about boat motors. The forum has made it possible for me to troubleshoot my own engine and to start helping others who are just learning.

 

[vann66]

Re: Thanks for the help.

Just wanted to extend my thanks for all the help I received here. Got my lower unit seals replaced with lots less trouble than I expected. Following advice from the forum I replaced the impeller while I was at it. Good thing too since it was in pretty tough shape. Got the lower unit back on on Saturday, slide the boat in, and it works like a champ. Many, many thanks to all!

 

[ddbyrd3]

Re: Thanks for the help.

I would like to say a BIG thank you to the Management at iboats and the people here who reply to our questions. In the week or so I have been an active poster here, I have learned more than in my 5 years of boating..<br /><br />DHadley, CA, all these guys have really helped me out, and I definatly appreciate all of there help, and especially iboats for hosting this forum..<br /><br />THANKS!!!!!!!!!!!!!!!!

 

[Bear]

Re: Thanks for the help.

Lots of nice guys to thank. I haven't been posting for a long time (August 08, 2003) Too much work for too long. But I have been searching the archives a few times.<br /><br />Thank you Bruno. I saw that "Steven" is back too <br /><br />It was really nice to see all the old names here again. Hi guys! Keep it up!

 

[Flak]

Re: Thanks for the help.

I just want to say thanks to several guys here whose posts helped me avoid a few problems with the rebuild of my father-in-laws Johnson 70. I relocated the tell-tale today (a fews hours after gluing the exhaust gasket in ) after reading here about the service bulletin. I picked up that and several other important tips from browsing topics in this forum.<br /><br />Thanks folks!

 

[flexon_guy]

Re: Thanks for the help.

I just wanted to thank everyone that has helped me in the past also. There are to many to mention. The help was instrumental in helping me rebuild my first 1957 Sportwin 10 h.p. And now I am a motor head also.<br /><br />THANKS EVERYONE!<br /><br />Mike

 

[JonnyB]

Re: Thanks for the help.

A great big thanks to OBJ, who spends a lot of time using his experiance to help others. I really appreciate the tips you gave me on my faulty running motor. Jonathan

 

[Diver Dave]

Re: Thanks for the help.

Saved my life twice, great site, what's happened to the other OMC ace ??<br /><br />Dave

 

[mar t G]

Re: Thanks for the help.

THANKS GUYS

 

[Geoff Smith321]

Re: Thanks for the help.

Hi Ya All, I must also offer my thanks and gratitude to the great blokes on this forum. Although the 2 questions I have asked have not prompted an answer the information gleaned from reading about others problems and your helpful recommendations to them has helped me to nurse my Johnson VRO 70hp through a sticky period and she is now running top line.<br />Cheers my friends.

 

[bnk999]

Re: Thanks for the help.

So glad to see a thread like this -- Wanted to especially thank EUROLARVA -- This guy is the Chrysler king -- he is always patient and never talks down to any "stupid" questions -- Would not have been able to replace my powerhead without his insight -- Also a huge thanks to myoutboard, Roscoe, and everyone one else on the chrysler/force forums that has helped me out!!

 

[Runder]

Re: Thanks for the help.

This site has been very very helpful in my quest for information on my motors.<br /><br />GreatSouthBay_Boater

 

[reddog349]

Re: Thanks for the help.

This site is the best <br />!!!!<br />.Im a person who knows little about motors but tends to worry at the first hicupp so its nice to have a forum to get answers.<br />THANKS to all the advice ive currently gotten and all the answered to questions im sure ill ask!!!