Search results

  1. P

    Carb leaking gas from top two holes 1989 85hp

    I just got taken apart the needle has a rubber tip on the end that is not in good shape I think that may be my problem. Gonna order a rebuild kit
  2. P

    Carb leaking gas from top two holes 1989 85hp

    You think maybe the float is not adjusted correct
  3. P

    Carb leaking gas from top two holes 1989 85hp

    I'm about to go take the carbs back off and take a look. Hopefully no can get it fixed.
  4. P

    Carb leaking gas from top two holes 1989 85hp

    Ok so I'm working on 1989 85hp force. Have other post with work I'm doing on it. Everyone on here has been a great help. Got my carbs cleaned out today installed the fired it up and now has is leaking on my middle carb out of the two hole on the top has one on each side. It leaks even when I'm...
  5. P

    Tilt trim switch wiring

    I'm sure I messed something. Cleaned it all out blew out with compress air. Started ok but now this gas leak. Ahhhh
  6. P

    Tilt trim switch wiring

    Well that failed put carbs back together. Put them on started it up and the middle carb is leaking gas from each side there is a hole on both sides and both are leaking. Any ideas what could be causing this. It leaks big I just prime it with primer bulb
  7. P

    Tilt trim switch wiring

    Should get it all buttoned up tonight and gonna take it for another test tommorow fingers crossed I'm not paddling again. Lol
  8. P

    Tilt trim switch wiring

    Yeah definitely gonna put one on there
  9. P

    Tilt trim switch wiring

    I don't have a manual but I will do my research
  10. P

    Tilt trim switch wiring

    Ok will do gonna do it tonight hopefully. Gotta stop get some cleaner after work.
  11. P

    Starter and choke issue

    That worked for mine also it's now fixed. It was weird but on mine if that thing isn't just right in that sleeve it wouldn't do anything.
  12. P

    Tilt trim switch wiring

    You mentioned setting floats to spec. I haven't removed the floats. There was a little spring were the screw goes into were the bowl hooks up. Took that out and cleaned up inside the as good as I could last time I cleaned the carbs
  13. P

    Tilt trim switch wiring

    Gonna work on it tonight and tomorrow night after work. When I'm cleaning the carbs should I take them completely apart as last time I cleaned them I just removed all three bowls and cleaned out with carb and choke cleaner. Cleaned the whole carbs down and soaked them over night in seafoam.
  14. P

    Tilt trim switch wiring

    Oh I know that tank is going in the scrap pile lol
  15. P

    Tilt trim switch wiring

    About three days old
  16. P

    Tilt trim switch wiring

    Got carbs off gonna clean them tonight when I get off work and try it again Wednesday.
  17. P

    Tilt trim switch wiring

    I know I've cleaned the whole system carbs and screen. Think I found problem. All I had was a six gallon plastic jug. Found 12g used metal jug appears clean. Sloshed gas around before installing and looked good. Took cap off looked down and tons of rust floating around in it
  18. P

    Tilt trim switch wiring

    Just to be more clear on my current issue. Choke is fixed it had to be adjusted in the bracket and now works perfectly. So when I took it out today. It started off amazing ran great. Jumped right up on plane maybe 25 30mph. Trim the engine up a little opened it back up and stared off great then...
  19. P

    Tilt trim switch wiring

    Also if I pull the hood off while in the water there is water down at the bottom. Not up to the engine just a small amount at the very bottom is this normal or maybe an I having issues there to
  20. P

    Tilt trim switch wiring

    Well got it out on water today. Run great about 30mph no issues. Then bam fell on it's face. Paddling back lol fun fun I believe I'm having carb issues just took them apart and the bowls are full of gunk and trash ehhh. Live you learn
Top