Search results

  1. Faztbullet

    1973 Evinrude 115 - what lower/midsections will the powerhead attach to (20 -> 25")

    Nope ..Nada
  2. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Soak in carbon guard or Seafoam , rinse with rubbing alcohol
  3. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Dump em out quick as the earlier valve had nylon balls and acetone will damage the plastic. Rinse em out with syringe and 50:1 mix the check to see if salvageable
  4. Faztbullet

    snapped driveshaft Mercury 2011 150 Optimax

    Tis combination of stainless and nickel and is heat hardened at pinion bearing. They snap right above heat treat, just take right rpm and shock to gearing
  5. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    No need...start it up and pull the line. Valve should spray fine mist like paint can, if dribbles out or blows blobs valve needs cleaning or replaced
  6. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Da ones in red..
  7. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Primer nipples are free flow as when the primer is off it is the check valve.
  8. Faztbullet

    84 Evinrude 150xp piston ring gap.

    What size toon? I have a 25ft Lowes with a 150(reinforced transom) and run a Solas 15x15 @ 5400rpm (1" carbs) and run low 30's mph
  9. Faztbullet

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Drive em in with a 5/32 deep well socket, taper locks em in
  10. Faztbullet

    84 Evinrude 150xp piston ring gap.

    .015 to.022 is good. The newer supplied rings will have a larger gap
  11. Faztbullet

    snapped driveshaft Mercury 2011 150 Optimax

    Just a matter of time and right condition Chris...they all snap. Yours will be at the pinion. Stock 3L break under water pump, Torquemasters at pinion
  12. Faztbullet

    snapped driveshaft Mercury 2011 150 Optimax

    That has the non ratcheting lower so it is a lil less forgiving than the ratcheting models.
  13. Faztbullet

    snapped driveshaft Mercury 2011 150 Optimax

    Where is it breaking at? Pinion or upper DS bearing?
  14. Faztbullet

    Merc 650 ignition system swap

    Nope as nothing will just bolt on. I did a 150hp BDI to ADI once and there is a lot of machine work and customer brackets needed
  15. Faztbullet

    Merc 125HP on a 1996 Trophy, no spark and would not start before that

    That video wont help as your motor has CDM modules
  16. Faztbullet

    115 Johnson v4 2000 trouble staying started oil/gas leak from exhaust

    50:1
  17. Faztbullet

    115 Johnson v4 2000 trouble staying started oil/gas leak from exhaust

    Just replace the oil cap in boat...if bad it will build pressure when its hot outside and push oil thru VRO into carbs
  18. Faztbullet

    What could have caused this to happen?

    Rectifier failed...bad terminal connection at battery if battery selector switch, bad cell in battery, loose battery connections, bad connections at rectifier
  19. Faztbullet

    1988 GT 150 Revs to the moon upon start,

    got a hot foot?
  20. Faztbullet

    1988 GT 150 Revs to the moon upon start,

    .
Top