Search results

  1. FunInDuhSun

    Renting A Boat

    I’d also suggest you both take a Safe Boater class. If you were born after 1972 I believe it’s mandatory. In it you will learn the basics- safety, navigation aids, rules of the road, etc.
  2. FunInDuhSun

    Steel OMC 3 gallon tank issue

    I’ve used this tank for 15 years. It has always worked fine with my 25HP Evinrude. This spring it wouldn’t feed gas at all, so I removed the line from the tank. It tested just fine, pumping gas thru the squeeze bulb like it should. I don’t see a way to access the pickup inside the tank because...
  3. FunInDuhSun

    What battery to use?

    You should get a pair of dedicated batteries for the troller and finders, and keep the starting battery just for STARTING. That’s how most bass boats are setup. Won’t hurt to keep a jump box onboard, too. JMI. Even my little Jonboat has a separate troller battery.
  4. FunInDuhSun

    Batteries

    Ideally, you want a “starting” battery for each engine, connected thru switches capable of directing power to either (or both) engines. A third battery is typically used as a “house” battery, which would be used to run any 12V equipment when at anchor. This allows both of the starting batteries...
  5. FunInDuhSun

    Are these gelcoat blisters? Need general advice on repair.

    I’m a fan of Pettit, used their bottom paints for decades. Remember to apply the first bottom coat within the same timeframe as the barrier re-coats. Some people (not me) like to use 2 different bottom paint colors to tell them it’s getting thin. Here‘s a paragraph concerning the Great Lakes...
  6. FunInDuhSun

    Delta style anchor for coastal MA/RI?

    The short answer is Yes. Its a great anchor. The next question is- what size Delta will you use? FWIW, my 34 Silverton came with a 22# Delta, which was sized correctly for the boat. Worked just fine for many years, anchoring in mud, oyster shells, sand, and thru occasional grass. About 8 years...
  7. FunInDuhSun

    gas odor only when underway

    Yup, that’s called the “Station Wagon Effect”. Some of the manufacturers tried to minimize the problem by going to side exhausts.
  8. FunInDuhSun

    First time patching gelcoat, couple questions

    Well without mat, the resin can chip very easy. The mat gives it strength.
  9. FunInDuhSun

    Are these gelcoat blisters? Need general advice on repair.

    Regarding question #1- when you do the barrier coat, make SURE you are able to do each re-coat within the specified timeframe. If you’re late, the previous layer must be scuffed up to allow the next coat to properly adhere. Interprotect 2000e is a good product. Will you be doing a bottom paint...
  10. FunInDuhSun

    First time patching gelcoat, couple questions

    Looks like air bubbles inside. Did you lay on any mat, or just fill with resin?
  11. FunInDuhSun

    Fixing up old AMF Sunfish/ Minifish boats

    Grew up in the 60’s and always had a Sunfish. Sold it in the ‘80’s because I moved to powerboats and ‘didn’t have time’ for a sailboat. Retired about 18 months ago and suddenly found myself with lots of free time. Just happened to see a Minifish for sale locally cheap so I took a look. Not bad...
  12. FunInDuhSun

    Jimmy Buffett fans check this out!

    Going thru my pictures and found these from his (surprise) visit in October 2020 to the upper Chesapeake. This is a compilation of images circulating during that time. Wish I could have met him, that lighthouse is literally in front of my marina! I posted these in my media album...
  13. IMG_0039.jpeg

    IMG_0039.jpeg

  14. IMG_0033.jpeg

    IMG_0033.jpeg

  15. IMG_0040.jpeg

    IMG_0040.jpeg

  16. IMG_0038.jpeg

    IMG_0038.jpeg

  17. IMG_0041.jpeg

    IMG_0041.jpeg

  18. IMG_0042.jpeg

    IMG_0042.jpeg

Top