Search results

  1. K

    Safe to tow with bow not resting on front roller?

    You could try moving the whole piece with the winch on it back. There are 2 U-bolts at the bottom where the winch post joins the trailer, loosen those and slide everything back. Hopefully the roller will fit above the ring where the strap hooks to the bow.
  2. K

    Need More Bling

    I agree, just right!
  3. K

    Rollet trailer....controlling during launch

    You could also try backing a bit further down into the water so more of the weight of the boat is supported by the water.
  4. K

    Screw and Pilot Hole Sizes

    I wondered about doing sometning like that. Was it thickened resin? I didn't try it because i figured the thickened resin would be too thick to run into the threads and take their shape.
  5. K

    Sharing a berth

    The cod fishing season opens here on Saturday, it will be real busy there when that starts. Let the games begin!
  6. K

    yamaha 6y5t gauge hook up

    Thanks Boscoe, I got it all working after. You are right, its a 703 controller. I appreciate all the help.
  7. K

    yamaha 6y5t gauge hook up

    Thanks for the diagram and going thru the effort, but that might as well be chinese for how much sense I can get from that!
  8. K

    yamaha 6y5t gauge hook up

    I suspect there is. The controler has 2 sets of wires leaving it. One contains the wires that go to the tach, the other is a shorter set of wires. What are they for? Also should I run accesories from the yellow wire in the tach harness or is there another way to get power to a switch panel? I,ve...
  9. K

    yamaha 6y5t gauge hook up

    I got the guage to work, it was plugged into the right socket, I just didn't have the rest of the wires beside the plug hooked to the guage. It wasn't getting any power! Thanks for your help. Now I have another electrical question. The wiring harness to the guage has extra places where you can...
  10. K

    yamaha 6y5t gauge hook up

    I'd call it white, and the gauge did'nt work when i pluged ti in. I'll try again tomorrow.
  11. K

    yamaha 6y5t gauge hook up

    I found it (i think)! There was a capped plug in behind the main round plug up on the side of the motor. Anyway it was capped and white and the cable plug fit it perfectly so I think I'm good, I didn't actually hook up the gauge yet because i'm still working on the dash where it will go.
  12. K

    Sharing a berth

    I had to look up "med mooring", ha that would be worth watching. as long as your boat was in the middle of it!. I saw 2 guys come in a large heavy open fishing boat a couple of years ago whose inboard motor was removed and the had an outboard instead with only a tiller handle for steering. The...
  13. K

    yamaha 6y5t gauge hook up

    OK, thanks, I'll have another look today.
  14. K

    yamaha 6y5t gauge hook up

    does that mean my tach wont work with this motor?
  15. K

    yamaha 6y5t gauge hook up

    Yeah i saw that plug, it do have a cap on it, but I thought it only had 2 wires to it? I'll look again to be sure, thanks.
  16. K

    yamaha 6y5t gauge hook up

    Hi, I'm trying to hook up the guage but I can't find where the 4 pin wire plugs into the motor. Its a f90A 2016. The manual wasn't in the box with the guage.
  17. K

    Sharing a berth

    I would assume (hope) so. I forgot to ask as I wasn't interested in that arrangement anyway.
  18. K

    Sharing a berth

    That's the idea, but a much, much smaller scale. When the arguments start I'll be happy those guns aren't nearby!
  19. K

    Replacing just the rotted area or whole back of boat/transom?

    Most likely partial repair won't even be an option because its very likely all rotten or at least wet. As said above, the stringers are probably gone too. On the bright side doing the fiberglass work isn't too hard once you get the hang of it and there are lots of good sources of info here. Just...
  20. K

    Mounting bolts

    Honestly, I wouldn't know the difference between the two, so I really don't know!
View older results
Top