Search results

  1. Texasmark

    Prop hitting anode

    Hey Jimmbo, just curious......some names?
  2. Texasmark

    Does my outboard have a thermostat.

    I don't think any of the originally designed, 4 cylinder Mark 30 or Mark55, or the 6 cylinder either up to the Mark 1000 first 100 hp outboard type power heads ever had a thermostat.
  3. Texasmark

    BRP reveals a new style of outboard, Rotax powered, horizontal crankshaft....

    I think they drowned or sank from the stern since the weight and thrust were so far from the stern and slow speeds and cutting the throttle put the powerhead in the water.....just hoping the cowling seals were working. Owners have posted on here concerning my 2 comments.
  4. Texasmark

    water pump not pumping

    Excellent work!
  5. Texasmark

    Throttle Cable Adjustment 2000 Johnson 90

    On my Mercury 2002 vintage, 90-115 HP, I adjust the barrel on the cable at the engine such that the WOT linkage on the engine stops before the control box can run the cable's length disconnected (at the engine). The barrel is moved forward on the shaft in your case then reinserted in the slot...
  6. Texasmark

    WOT rpm range

    You have your best hole shot with what you have. Obviously running alone, having a rev limiter or you controlling yourself with the throttle will maintain your 6k rated performance. My engines have always run at mid to top end and when I got older and got to boating alone, I always ran the top...
  7. Texasmark

    Prop hitting anode

    If you slide the prop on the shaft and turn till it hits the tab, mark the location the remove the prop, turn it 120 degrees and repeat, then repeat. If all blades don't hit the same point, as others have said, your shaft is bent, the hub is not positioned properly/wrong one/defective, or the...
  8. Texasmark

    What type/size of boat to get for the St. Lawerence river?

    Not being sarcastic but if you can drop 150k on a boat fuel isn't an issue.
  9. Texasmark

    Adding trim tabs, positioning, transducer placement, etc.

    Take your existing transducer and locate a space near the keel (centerline of the hull area) and adjacent to the transom inside the boat. Clean the spot on the hull thoroughly, and rough up the surfaces of that spot on the hull and the bottom of the transducer. Get a JB weld package and weld...
  10. Texasmark

    Power/towing question

    I agree when not under load it can fool you. Possibly some of the winterization material has fouled one or more plugs. Pull them and see if any are wet after running the engine for a few minutes.
  11. Texasmark

    water pump not pumping

    I have always heard that if installed in the reverse direction the blades will correct themselves. In some eccentric pumps I agree. I just redid my 2002 115 Merc and apparently that pump is used on numerous engines above and below that HP and there isn't enough room for the blades to reverse...
  12. Texasmark

    Set up

    If you do try and expect to return, carefully install it, make a test run, if dissatisfied, remove it, clean it up like new and put it in the box. The dealer has to be able to sell it as a new, not used prop if he swaps with you for another.
  13. Texasmark

    Prop help, 90hp Merc

    No doubt you should hit the sweet spot since you changed 3 things that each are an improvement.
  14. Texasmark

    1985 Johnson 4HP prop spins upon load

    Classic definition of a spun hub in the prop.
  15. Texasmark

    Battery discharge. ...normal?

    I have a dozen + batteries in equipment plus spares on my farm. Just last month I realized that the normal discharge rate on my batteries, most are new or a year or so old, is much faster than I had anticipated. Makes no difference if the battery is installed in equipment or sitting on the...
  16. Texasmark

    What kind of bolts for aluminum handles?

    Looking at a metals compatibility chart, Aluminum is a Group II metal. Metals in group II are Aluminum alloys, Zinc, Cadmium and Beryllium. With that said, a Cad plated steel screw would be your best bet as long as in the installation you don't disturb the Cad. plating on the bolt......which...
  17. Texasmark

    Prop help, 90hp Merc

    Sorry for the typo....yes its 2.33. Your boat is apples and oranges from mine. You are running a much different rig from mine. I can see where you need to drop pitch significantly to get positive response from that hull/load. You mentioned fuel pump, yes its time for a repair kit as the...
  18. Texasmark

    Prop help, 90hp Merc

    You have a problem somewhere. If that 4 stroker has the 3.3 gearbox as my 2002 90 2 stroker, running on an aluminum 17.5' Fishmaster bass boat, just me, fuel and gear, I was running a 23P Ballistic 3 blade SS.....making the wake in my avatar....rpms in the 5600 area....right at 50 MPH.
  19. Texasmark

    No water coming out of the pee hole

    Having said what you said about complexity in cleaning it out, knowing you are dealing with mud and a biodegradable insect, I'd do what you usually do with your boat and eventually it will get blown out. I hear you on the pests. I have a farm and they clog up everything and are good at ruining...
  20. Texasmark

    Oil Injection removal

    I pulled the drive gear out of my oil pump on a 2002 90 hp Merc. Went to 50:1 pre mix. Only thing I saw/felt/had different was a light puff of smoke when doing the (start of the) hole shot coming out of the no wake zone that I didn't have before with the 90:1 my service manual said my engine...
Top