Search results

  1. MNhunter1

    New Journey

    A couple of fish pics from the other weekend as well...
  2. MNhunter1

    New Journey

    I guess I'm a bit overdue for an update. had a little debacle with the paint I had originally planned on using being discontinued, so I had to switch gears and change up my plans. Stripped everything I had originally painted back to bare metal and started over again. Settled on a commercial...
  3. MNhunter1

    What is the biggest motor my Starcraft will handle?

    Very true. I actually had a 35hp mid-80's prop rated Merc on that 15ft. Would push it along at 28-29mph unloaded. I believe the hull was only around 550lbs.
  4. MNhunter1

    What is the biggest motor my Starcraft will handle?

    My 1972 15ft Nova had a max-HP rating of 65hp
  5. MNhunter1

    Starcraft on C-list/ebay!

    Looks like an 18ft I/O Nova on a galvanized trailer for a reasonable price: https://www.facebook.com/marketplace/item/174688558803794/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A6f60e918-d17c-4b0c-bcc5-884219a0d189
  6. MNhunter1

    New Journey

    Not bad at all.
  7. MNhunter1

    New Journey

    Just checking in. Slow movement on the MR180 w/ other distractions and obligations, but I started to tear into the old Tower of Power. Fuel pump, carbs, water pump getting some love.
  8. MNhunter1

    1979 Starcraft 16’ SS Refresh

    Are you going to squat that thing off? :)
  9. MNhunter1

    1982 MR 180

    Interested in the brand/model of the 12 gallon tank as I'm looking to replace my dual 6 gallons as well.
  10. MNhunter1

    New Journey

    I did replace the uprights with stainless bar, and the side mounts/supports with HDPE. Happy to send my originals your way as I have no use for them. Just shoot me a PM and we can discuss.
  11. MNhunter1

    1982 MR 180

    I would personally stick with aluminum rivets. Stainless for screws, aluminum for rivets. Solids preferred for anything structural, but if you don't have access to the tail end, then you're stuck with closed end blinds. Aluminum will avoid dissimilar metals and assumedly fill the hole better...
  12. MNhunter1

    1984 starcraft islander

    I've only left mine docked for a few days while on vacation. Bilge pump with float switch wired direct to battery as a minimum, but I'd invest in a boat lift if I planned to do it regularly. Otherwise, I'd plan to keep it on the trailer when not in use. I've also seen some pretty significant...
  13. MNhunter1

    1976 22' SUS O/B "Hydration Break"

    I set my circular saw at an angle using the old deck angle to set my blade for the long runs. Angled my jig saw in the same manner for the notches around the ribs in the bow.
  14. MNhunter1

    1976 22' SUS O/B "Hydration Break"

    I've used the wood joiners on all three of my builds, and the same process of doubling the deck with an extra piece of 3/4" ply wherever seat pedestals get mounted. Glued and screwed, and sealed with spar. Make sure to account for the stringer placement if you go this route. Depending on how...
  15. MNhunter1

    New Journey

    I'm looking at replacing the wooden uprights for my flip flop seat with some aluminum flat bar as shown in the attached pictures. The current wood pieces measures 2" wide and 7/8" thick, assuming teak? If I were to use a 6061 aluminum flat bar, would 2" x 1/2" of similar length be sufficient...
  16. MNhunter1

    1968 StarCraft Holiday restoration

    Nice work @jdvasher!
  17. MNhunter1

    2022 Starcraft Splash of the Year Champion!!

    Congratulations @jdvasher!
  18. MNhunter1

    New Journey

    I sent them an email on Monday, but haven't heard anything back. What I discovered through multiple phone calls to different companies/suppliers, was that most don't typically hold any physical inventory and the product ships direct from the manufacturer. Looks like I'm changing from green to...
  19. MNhunter1

    1978 SS 16 restoration

    You asked for feedback. I provided it. I apologize if it wasn't to your liking.
  20. MNhunter1

    1978 SS 16 restoration

    The factory consoles are tied into the gunnels and deck. I think you will find that they do provide a lot of structural integrity when combined with the wood panels on the console fronts and windshield. This is why it is always recommended to ensure your are engineering some additional support...
Top