Search results

  1. R

    Rope Stuck on Evinrude 6HP outboard

    I believe this motor needs to come apart.
  2. R

    Bent prop shaft

    There may also be damage to gear teeth.----Can't be seen.-----But often results in stripped teeth at a later date.
  3. R

    Rope Stuck on Evinrude 6HP outboard

    I have more than 1 of these motors.----If a motor is STUCK , it comes apart for inspection.-----I have a multitude of parts to replace rusted bearings and such.----New and used crankshafts on the shelf.
  4. R

    Rope Stuck on Evinrude 6HP outboard

    Perhaps the motor was submerged and not recovered / treated promptly.----The bearings / crankshaft could then be rusted badly.-----Woul;d need a complete teardown if that is the cae.-----Not worth taking this 77 / 78 / 79 model to a shop for that level of work.----Your location ?
  5. R

    Rope Stuck on Evinrude 6HP outboard

    Answer questions after CAREFUL reading.----Does the flywheel turn a wee little bit ?----Or is it absolutely stuck with no movement whatsoever.
  6. R

    1974 Evinrude 115 hp 2 stroke

    Your location ?
  7. R

    Reeds?

    Then with new reds it should start even quicker.
  8. R

    Reeds?

    Install a used ---Johnson / Evinrude electric primer valve.----Then hard starting will go into the history book.
  9. R

    Rope Stuck on Evinrude 6HP outboard

    ????----Can you turn the flywheel ?
  10. R

    Lund 315 new to me - now what do I do?

    You can start it up the way it is.-----If it starts / runs replace the impeller.
  11. R

    90hp outboard died suddenly, wouldn't restart

    Nobody can see or touch your motor !-----Do some trouble shooting / answer questions to come up with a happy ending.
  12. R

    Evinrude big twin 40

    Best to look after that electric shift gearcase.-----New seals are cheaper than the springs , clutches and gears.
  13. R

    90hp outboard died suddenly, wouldn't restart

    ???----When / if one carburetor is plugged you might be starving one cylinder of fuel and OIL !---Serious damage mat occur.--These motors in good condition start right up.-----Load tested the battery?-----Pushing the key in and holding it in while cranking it over for cold starting ?-----Oil...
  14. R

    Ugly Impeller

    Factory impeller ?-----Or something else.----Sure looks like it was run dry a few times.
  15. R

    Evinrude big twin 40

    Could be tiny air bubbles.----Let sit for 3 days and check.
  16. R

    Evinrude big twin 40

    Are you checking gear oil 1 hr after your trip or 3 days after your trip ?
  17. R

    75 hp Evinrude issues

    Those may have used a wee box with relays.-----That was mounted inside the boat.----Later models had it mounted up above the carburetors.----Your location?
  18. R

    Confusion in Evinrude ID for E75TLCRD

    T----Is for trim / tilt.----And I do not believe the 75 HP model was ever offered with a tiller.
  19. R

    1971 Johnson 85hp carb options

    Yes ---They fit.
  20. R

    115 Etec gearcase assembly

    Replacement pinion MUST be shimmed to the lower driveshaft.-----Where bearings cleaned of any / all metal chips ?
Top