Search results

  1. R

    Need help with my prop

    Is there foam under the floor?---Possibly soaked with water?----What is the pitch on the prop that you have now ?
  2. R

    96 Johnson 28SPL lower unit interchange?

    Need to find a better shop ~~----Oil fill washers are the same from 1950 to 2020. -----Gearcase from any of the 28 HP model will fit.----Years 1986 to 1997.
  3. R

    2000 Johnson 60 HP

    Information must be posted.------What pitch prop?---What boat?----Does spark jump a gap of 3/8" on each lead?----Actual compression values.----Does timer base rotate fully?----Flywheel key checked?----Run with timing light ( one cylinder at a time ) to see if there is a spark issue.-----Shine a...
  4. R

    1979 80 hp Mercury

    That is the nature of a 2 stroke engine.-----I say it all the time.----" 2 strokes and oil mixed with the gas is not well understood "
  5. R

    Yamaha 115 (ETXH) Outboard Propeller

    Need to evaluate condition / power output of the motor.-----Size of the boat?----Need to go to 15" pitch for test run.
  6. R

    Merc not going in neutral but starts

    This sounds like an easy adjustment to me.
  7. R

    88 40hp Evinrude not starting

    Likely tried to use a carburetor kit from --amazon---nothing but junk.-----Motor simply sounds awful.------Best to start over with factory parts !
  8. R

    1986 90 hp johnson ....are these parts toast?

    Trouble shoot with a timing light.-----Hook it up to #1 and test run.-----Observe the flashing light when motor falters.-----Repeat with 2 , 3 , 4 as needed.-----Then again it could be a plug wire shorting to the cowling too.------I can not touch / hear your motor.----So the testing is up to you.
  9. R

    80's 150HP black max problem (won't run when shifted)

    Two strokes behave a little different !-----When idle mixture is adjusted on a hose you can get a really sweet / smooth idle.-----Often it then is too lean to accelerate in gear at the lake.---Fact---There are no accelerator pumps in the carburetors.-----Therefor the low speed mixture must be...
  10. R

    1957 Johnson Seahorse 35hp value?

    These older motor can be an economical way to go boating.-----But they require that you learn / want to learn how to repair them.----Most shops do not work on them.------So these motors are worthless to most folks today.----And folks who know how to repair them often get them for free.
  11. R

    80's 150HP black max problem (won't run when shifted)

    At the house on muffs ( in gear ) is still neutral.----Prop does no WORK in air.
  12. R

    Strange issue...Shift shaft stuck in upper unit and came out of lower unit, need help!

    Sounds like the shift shaft splines jammed due to rust forming in the coupling.----The splines normally slide out and there is NOTHING to disconnect.-----These 4 cylinder 650's are a nice runner.----The first thing I would do is a compression test.----Post the actual values.---Or remove bypass...
  13. R

    What is this?

    Yes , that is an outboard with a special bracket.------There are 2 different blocks in V-4 models.----Need model #.
  14. R

    1999 Johnson 115 starts then dies

    Throttle plates should be CLOSED at idle.-----Correct that FIRST and test run.------Replace that damaged roller.
  15. R

    Adding tilt and trim to 1979 vintage 55HP Johnson

    Trim was an " expensive " option in those days.-----Today you rarely see a big motor without trim.-----And you see 9.9 HP models with trim / tilt options.
  16. R

    88 40hp Evinrude not starting

    Float valve is stuck.----Clean the carburetors.
  17. R

    1957 Johnson Seahorse 35hp value?

    Was given a 2004 Ya@%A 90 HP 4 stroke.----Not worth fixing.----Picked up a 150 HP Ya%$#@a 4 stroke for $1000 Ca funds.----Well to do folks said---" get us a new one " no need to waste a short season at the summer home.
  18. R

    Adding tilt and trim to 1979 vintage 55HP Johnson

    So many people are poorly informed.----Indeed a power trim / tilt 0172858 was an option for the 55 in 1979.----Post pictures of the ones found on E-bay.-----And they are easy to install.
  19. R

    Seeking a marine mechanic to service my 1979 OMC Zephyr Sail Drive (model 15S10S, 15 HP, 2-stroke) on my O’Day 25 in the Chicago area

    It is the same block as the early 25 / 35 HP.---Same electricals.--The intake ports are tiny.---I have a NOS block on the shelf here.-----That restricts the breathing thus limits output.----I sail too , but too far away to help.----There must be a fellow sailor there who can help you.----Post a...
  20. R

    1957 Johnson Seahorse 35hp value?

    The 4 strokes really run so nice.----But that comes at a cost.-----I can't believe the number of used 4 strokes for sale these days.-----Perhaps the folks who can afford them buy a new one.----Repair / service work is big $$$$ on them.
Top