Search results

  1. nola mike

    Mercruiser 3.0 overheated, Is my motor shot?

    The grommets and water pocket cover are still getting water if the impeller is working though.
  2. nola mike

    Mercruiser 3.0 overheated, Is my motor shot?

    Again, he shouldn't have any issues with the lower unit
  3. nola mike

    Mercruiser 3.0 overheated, Is my motor shot?

    No
  4. nola mike

    Mercruiser 3.0 overheated, Is my motor shot?

    His overheat occurred after the transom
  5. nola mike

    Mercruiser 3.0 overheated, Is my motor shot?

    I'd do a compression test, make sure it turns over easily, let er rip and see what happens. Can't imagine removing the head just because. Your rubber boots and flappers are toast, and you will need to find out where the pieces ended up. And even without the compression test you'll know pretty...
  6. nola mike

    Insurance

    My primary liability is a rider with the homeowners, and my umbrella does cover after that. No umbrella provides stand alone coverage afaik.
  7. nola mike

    Insurance

    This. Not to mention your deductible. Not sure if a marine claim would count against your other insurance lines also...
  8. nola mike

    TRANSOM ISSUES!!!!

    Seems like a bit of a shotgun approach. Certainly worth drilling down further in the transom to check out its condition though.
  9. nola mike

    I'm doing my Bellows. Mercruiser A1G1. Are the Amazon Bellows Kits any good?

    My litmus is how much pain does it take to get in there and redo the job. I've had good luck with Sierra, but for a bellows job I would certainly not go cheap. Also, if there's a failure of the part is it going to leave me stranded or just inconvenienced? How easy is it to cheap out on the part...
  10. nola mike

    I'm doing my Bellows. Mercruiser A1G1. Are the Amazon Bellows Kits any good?

    ^diddling I'll show myself out...
  11. nola mike

    Help me identify whether I have a 1" or 1 and 1/8" shaft

    And if my high school geometry is correct, closer still to 3.1416 😀
  12. nola mike

    Ujoints clunking?

    At least on my alpha no problems greasing with the zerk in that location.
  13. nola mike

    Sea Pro 195 F/S fuel tank size

    Empty it and refill. That will get you very close, although not close enough for me to trust with a premix. Now you know how much you added, so add the appropriate amount of oil. Going forward, just add your 16 oz to every 6 gallons or whatever.
  14. nola mike

    Wiring positive cable from Amps to battery or common on Switch?

    Most (all?) amps that I've seen are turned on by the head unit anyway, so while there's battery power to the amp at all times, it isn't "on". I have my head unit on a switch, so unless the switch is on the head unit isn't getting power. If there were an acc position on my ignition switch I'd...
  15. nola mike

    I Got Me a Mercury !!!

    You got me interested. Seem s like it's still closer to a CDI type system than a points system electrically. This is the most in-depth explanation that I found, though the writing is a bit dramatic: https://wrcoutboards.org/wp-content/uploads/2021/02/The-Phase-Maker-CDI.pdf Also, you probably...
  16. nola mike

    1986 Four Winns Horizon 190, Carb Linkage?

    @Lou C can help with the carb, although that doesn't sound like the issue anymore. At speed, try closing the choke a bit manually or covering the air intake. You should lose speed. What do the plugs look like? "Compression is good"--numbers? Timing--have you checked it, and make sure it's...
  17. nola mike

    Mercruiser 3.0L LX - EST Ignition - how to check for proper spark?

    This will tell you if there's the impulse for the spark, but not the quality. Good first step but not definitive. That said, if this is all 4 cylinders then probably fuel. 2 cylinders OP could be dropping cylinders from ignition/compression/fuel. Best way to check is with a dedicated spark...
  18. nola mike

    Spring replacement?

    Yeah I was a little hesitant with the SS not knowing the hardness, having second thoughts with those. No way to check the old ones. The bushings are nylon, still there just a bit of play. Planning on getting the correct size but have some time now. Hopefully don't need to use the trailer again...
  19. nola mike

    I Got Me a Mercury !!!

    Get a DVA. Or you might want to build one. Not sure what type of electronic ignition is in that one, but I had a hell of a time last year chasing down an ignition problem on my 25 hp. Intermittent weak/no spark. I fired up the parts cannon to no avail, but having the DVA would have saved me a...
  20. nola mike

    Rain water getting into front of boat (Sea Ray 180)

    So that isn't a bad idea. Get a piece of material to run from the top of the windshield/under the existing top, down and over the seam of the bow cover.
Top