Search results

  1. BWR1953

    My first StarCraft

    Very nice! (y)
  2. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    We're back to work! I made it through covid okay. Took the test today and I'm all clear! Symptoms stopped a few days ago, but we didn't go back to work because it was the boy's birthday and we had yard work, etc. after that. But we got out there this morning and the boy spent the bulk of...
  3. BWR1953

    1982 Starcraft Center Console 18' Rebuild

    Most here use large flange aluminum blind rivets, then seal them up along with everything else concerning the deck. I sure did.
  4. BWR1953

    1982 Starcraft Center Console 18' Rebuild

    I'd use stainless bolts with a solid backing plate for the bow eye. I patched holes in my KF with JB WaterWeld.
  5. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Wellsir, I'm a retired NASA Space Systems engineer and I can say right now that the plywood "motor pad" doesn't provide any structural strength, which is why I was confident in deleting mine. All it does is add to the workload and expense, then attract moisture and shed paint and whatnot later...
  6. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    If you mean this piece of wood, I deleted the one on my Kingfisher and am doing the same for my Chieftain. I just filled the holes with JB WaterWeld. Some guys have replaced that piece with sheet aluminum.
  7. BWR1953

    Where do I belong? Alum Goods 1687, SS16 Clone?

    Congrats! (y)
  8. BWR1953

    198x SS-150 rebuild

    I was reading this thread yesterday morning and afterwards I spent hours and hours researching air hammers vs rivet guns because I'm in the same boat, so to speak. :sneaky: And I learned a great deal. The difference between an air hammer and a rivet gun is like the difference between a...
  9. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Ahhh... doubt. The bane of DIY folks everywhere. 🤪 I'd owned a dozen boats before acquiring the Kingfisher and had never restored one. I only did a couple of very minor repairs and improvements on one of those. So, when I jumped in to "Frugally Fix Up" the Kingfisher, I had no idea what...
  10. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Hey, I hope you didn't interpret my post as criticism. It wasn't. Just trying to assist. :)
  11. BWR1953

    New bow board

    I had to replace mine as well, but I didn't remove the sheet panels. And that was a major mistake. It took me forever to fabricate a replacement which worked. I got it done, but don't recommend that route. I'd say bite the bullet, pull the panels and fab up your new piece. It'll be easier...
  12. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Did you read Watermann's rivet thread? https://forums.iboats.com/threads/rivets-rivets-and-more-rivets-repaired.741809/
  13. BWR1953

    198x SS-150 rebuild

    I too found a small hole near a rib which perforated the hull of my Chieftain and decided to pull the rib. Under the center of the pulled rib I found another hole. At that point I started pulling ribs until I was well clear of the corrosion area. In my case, it meant "only" pulling 3 ribs...
  14. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    I'll probably do the same thing.
  15. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    I'm not sure I understand the question. 🤷‍♂️ But I also need to provide some clarification. I haven't gone through and replaced every 5/32" rivet on the boat with a 3/16" rivet. What I'm doing is replacing the smaller rivets with the larger ones when I find a 5/32" rivet that actually...
  16. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Nice work! I noticed the different size rivets on my Chieftain as well. I decided to upgrade all the 5/32" rivets to 3/16" both for increased strength and to reduce the need for a variety of sizes.
  17. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Well, we're at a screeching halt right now. I tested Covid positive this morning. ☹️
  18. BWR1953

    Mercury 35 hp outboard timing

    Make sure that the gas tank vent is fully open. Don't ask me how I know. :rolleyes: :ROFLMAO:
  19. BWR1953

    My Starcraft

    🤪 :ROFLMAO:
  20. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Only a bit more progress today, but we had to run errands this morning. Got the stringers clean. Shiny! Reminded me of this 1980s song. 🤪 :ROFLMAO: Yesterday we received the 1/4" solid rivets in 3/8" and 7/16" length, so I decided to do a quick test in one hole. Worked perfectly...
Top