Search results

  1. jerryjerry05

    1989 85hp force outboard no start issues

    Gold /brass cylinder.
  2. jerryjerry05

    1995 120hp Force CDI wiring diagram help!!!!

    This is the part# for your motor. Google or ebay they range from 25-250$ CDI makes a good one. Try to stay away from the Chinese JUNK. REGULATOR ASSEMBLY, VOLTAGE 883071A1
  3. jerryjerry05

    1995 Bayliner Capri 1800ls force 120hp temperature sensor? Help

    It might go into the harness, orange lead??
  4. jerryjerry05

    89 force 125 leaking fuel from carbs

    Install a filter between the pump and the carbs. Fram G2 G3 G12 one of these will work and it's clear so you can see if there's any junk in the system? Dry float bowls? needle/seat dirty, hose bad?
  5. jerryjerry05

    Force 85 Control Operation

    The magnet? it's one continuous magnet that fits inside the flywheel. They do come loose but the motor won't start if it's loose. Had one 88/85 that wouldn't start unless it was tilted all the way up and the choke was used as you turn the motor over, after it started, there was no problem the...
  6. jerryjerry05

    Cyl Head

    The 30 year old motor should have the same comp readings as a new motor. Is it 95 on 1 cyl. or all 3? Does it run? All 3 low?, that shows the test was done wrong or the gauge is bad? It really takes a lot to warp a head so bad it won't work.
  7. jerryjerry05

    89 force 125 leaking fuel from carbs

    The second pic's hole: fuel from that shows the floats not set right or the needle/seat is defective??? or dirty???
  8. jerryjerry05

    Compatible parts motor

    The pack is designed to fire 2 cylinders. There's a blocking diode in there so you can have spark on one but not the other. Sometimes no spark on one is the stator. Try swapping the packs around and see if the no fire follows the change?
  9. jerryjerry05

    1995 120hp Force CDI wiring diagram help!!!!

    More info??? Year, model, serial# ?? Always include this when asking questions. No spark on a new rebuild: flywheel key, loose wire someplace, stator bad? Tell us the year and model #??
  10. jerryjerry05

    1983 Omc 3.8 V6

    IF??? it clicks!! that shows the solenoids getting power. The real test is with a test light: 2 lugs on the solenoid, one should have power just setting there, then the other should get power through the solenoid if you hit the switch. Test light should be in everybody's tool box. The solenoid...
  11. jerryjerry05

    What's the best size prop

    Put a 17-19 on it and you'll go faster
  12. jerryjerry05

    How fast is 85 force outboard

    The Capri with the 85 did almost 40.Took one to the Annapolis boat show and it was pretty fast.
  13. jerryjerry05

    Compatible parts motor

    Yup Nordins right about someone modifying you donor motor. Stick with the newer system. outboardignitiondotcoom has test procedures for both systems. The newer style on the 86 came with the plug in connectors(not the best) later 87 until 93-4 used the twin packs either blue or black. The black...
  14. jerryjerry05

    Point setting for 1985 50 hp force

    The 85 used the battery system.
  15. jerryjerry05

    1983 Omc 3.8 V6

    Sometimes there's another wire that hooks to the positive side of the battery. Also check the fuses under the dash, some have a fuse that sends power to the dash. There's a 50amp fuse someplace on your motor(should be??) see if that's blown. There might be a fuseable link(at the starter) that...
  16. jerryjerry05

    What's the best size prop

    Try your local boat places, some have used props they loan out to make sure you get the right one. Michigan Propeller has a prop finder service. Contact them with the info and maybe they can recommend the right one?
  17. jerryjerry05

    What's the best size prop

    That boat comes with a 90hp. and a 17 or 19 aluminum. Your 15p is it aluminum or stainless?
  18. jerryjerry05

    Pickup tube

    Get a parts diagram, any 80's 50hp. will work. Look at the "gear housing" diagram, you can possibly find one on this site? Your tube has a bend that kinda goes into a "blind" hole. Flashlight, look up inside and try to find the hole and push the tube up into the hole. The "hole" has a seal and a...
  19. jerryjerry05

    67 sea king

    You'll need a bit more info??? Horse power, model and serial #s? Try Franz Marine
  20. jerryjerry05

    1972 Chrysler 707HE 70hp 3-cyl conversion to automotive coil how to?

    outboardignitiondotcom has test procedures for the older motors.
Top