Search results

  1. 9

    Suzuki DF115 transom (Trim/Tilt) saver??

    what motor is this that has 2 different devices made on it for locking the motor up maintenance and trailering? a pic is worth a thousand words
  2. 9

    Suzuki DF115 transom (Trim/Tilt) saver??

    if you read your owner's manual it says that is not for trailering, only for locking the motor in the up position while doing maintenance
  3. 9

    8MLHU limited RPM

    is the timing advancing as it should. timing light should show what the timing is doing
  4. 9

    Stalling

    why does it not start with all plugs in place? no spark, motor will not spin over, or something else
  5. 9

    2001 Suzuki 4 Stroke Controls

    It may help if you said what motor you are talking about, but maybe not since it is the controller you are talking about I have no info on Zuke controllers
  6. 9

    2004 Yamaha HPDI

    this makes me wonder how many different HPDI motors Yamaha made in 2004
  7. 9

    How to operate side mount throttle for 1993 Yamaha jet?

    normally those control boxes would be turned around and mounted on the right side of the boat, so when you have a hold of it with your right hand you could operate the tilt and trim button with you thumb
  8. 9

    Timing and synchronizing a 1988 v4 130 hp 2 stroke. Need help.

    are you sure the spark is not going away when you set to normal or close to normal timing? just thinking wiring moved a certain way ends up killing spark maybe. there is a key, I guess it could be sheared But, TDC on pistions and marks on flywheel line up it should be good.
  9. 9

    Timing and synchronizing a 1988 v4 130 hp 2 stroke. Need help.

    I did not read anything about using the choke while trying to start. but raising the fast idle lever not only opens the throttle to allow more air in, it also may change the timing some also like you wrote. Could there be too much fuel to air for the cylinders to fire? do the plugs have spark...
  10. 9

    How to operate side mount throttle for 1993 Yamaha jet?

    the one on my 703 has a red part on the underside of the Tee handle that you squeeze to lift up so you can move the handle out of neutral to forward or reverse. is that what you are asking about?
  11. 9

    09 HPDI 225 3K RPM's in Forward

    switch, adjustment, or wiring maybe the softwear will be able to tell what is or is not happening. need to know the rail pressure is in spec also. takes more fuel to make it go when loaded up in forward in the water, but that should not drop cylinders unless injectors are not doing what they...
  12. 9

    09 HPDI 225 3K RPM's in Forward

    motor probably thinks it is still in neutral when in forward
  13. 9

    1988 70hp yamaha trim motor

    why? brushes get in the way? then buy a new aftermarket one, make sure you paint it well before installing if you are around saltwater
  14. 9

    1988 70hp yamaha trim motor

    brushes not making good contact might be the problem. take it apart and see what you find how rusty is the motor housing
  15. 9

    2008 yamaha motor key switch won’t alarm

    well if it has a new buzzer in it, you need to find out if it gets 12V+ to it with key on, and if the other end of the buzzer has a good ground to make noise
  16. 9

    2008 yamaha motor key switch won’t alarm

    is there a buzzer mounted in you controller? have you tested it with 12 VDC to see if it works?
  17. 9

    2008 yamaha motor key switch won’t alarm

    some motors should beep with the kill switch disconnected and the key turned to start,but the motor should not start when you do that never heard of a Yamaha to beep when just turned to the on position. also no one but you knows what motor you have
  18. 9

    2008 yamaha motor key switch won’t alarm

    can you explain that a little better? what do you mean by any buzzer when key on? and how are you testing the buzzer when kill switch pulled
  19. 9

    NO GO!!!!???

    Good to hear it is running better, but I do not understand how the float setting would keep it from running at higher RPM. were they way off and not letting fuel into the carbs?
  20. 9

    NO GO!!!!???

    some Yamahas do have a low speed and a high speed charge coil. I have no idea if yours has that or not. your service manual for that motor would have info on that
Top