Search results

  1. alldodge

    Axius repair on used boat Cobalt 303

    If your looking for the PCM 09 pin out https://www.crowleymarine.com/sb/2/13952
  2. alldodge

    Volvo Penta 5.0 GXI-E - Won't roll over

    Your plugs look fine Crank it over a few times then put old or new plugs in and see if it will start. If it starts and runs ok, check your exhaust manifolds to see if there is a leak and it gets hydrolocked
  3. alldodge

    Volvo Penta GL Not Pulling Water, Help!!

    Stop making new threads for same problem There is a fitting on top the drive that the raw water hose connects to. This fitting can get clogged up. Remove it and see if that is the issue
  4. alldodge

    Volvo Penta GL Not Pulling Water, Help!!

    For a 5.0 it's part number 21951348 https://www.volvopentastore.com/Maintenance-Parts-5-0l-5-7l/dm/cart_id.069313114--session_id.048509256--store_id.366--view_id.787187
  5. alldodge

    Help! Volvo Penta 5.0 GXI-E Overheating

    Don't post in a thread more then 90 days old. I have moved your question to your own
  6. alldodge

    Axius repair on used boat Cobalt 303

    Only one that "might" have an idea is @muc
  7. alldodge

    Bravo 3 can you change gear oil line without removing lower unit?

    When going to put the new line on the fitting, put a loose tie-wrap on the fitting first. Used needle nose to install new tube
  8. alldodge

    Axius repair on used boat Cobalt 303

    No clue on my side, but pressure going from 200 to near zero like it runs out of fluid.
  9. alldodge

    Those darn blue VP drain plugs

    Just replace every few years
  10. alldodge

    Those darn blue VP drain plugs

    Don't go there, will be a long con-vo The brass fitting that screws into the block is the standard 1/4 NPT. The NPT changes it to the Merc thread which uses the Blue plug or Hradin Marine SS plug
  11. alldodge

    Those darn blue VP drain plugs

    Most drill up thru and then use flat blade screw driver or easy out
  12. alldodge

    Those darn blue VP drain plugs

    Replaced mine with Hardin Marine stainless steel ones, they will not break. Blue plugs are ok but need to be replaced every 2 to 3 years
  13. alldodge

    Dean's List gets another motor

    Should be Gen 6, boat is 1999 but bought in 1998. Who knows might be older. Maybe have a look at the plate in it
  14. alldodge

    Dean's List gets another motor

    Motor came out today This is new, a tray under the intake. Have not seen that before, guess we will install in rebuilt motor. Injectors go out tomorrow to Smitty's in Michigan
  15. alldodge

    Mercruiser inboard 1980 Chris Craft Raw water cooling flowpath

    Looks like you need to move a couple hoses. The 2 coming off the very top section of the thermostat housing should go to the rear elbows
  16. alldodge

    Yamaha impeller needed

    Using your part number "YSC10103100C" the part comes up at a few different places. Are you looking for a cheaper place or any place? If cheaper I cannot help
  17. alldodge

    68' Johnson 20hp (FD 22M)..Want to add starter..

    Moved your thread and closed the other
  18. alldodge

    Mercontrol Manual

    Howdy and welcome aboard Need manual #2 for the motor and Trans. This manual does not cover the control Look in the link below and try to find your control for parts breakdown and then search for that model manual. The bad is its so old that even finding the model the breakdowns are not very...
  19. alldodge

    AC Not Working Properly After Winter

    So long as water is moving the AC should work unless there is something wrong with the AC. Doesn't need to be forceful but can be
  20. alldodge

    Well it happened. Water in oil

    Not to bad for a 40 year old motor
Top