Search results

  1. alldodge

    Raw water pump

    I would get kit 807151A14 and replace it every 2 to 3 seasons
  2. alldodge

    Adding fuse panel question

    With no more then your going to have, 8 gauge is great but 10 would be more then enough, but just my opinion
  3. alldodge

    Circuit breaker

    Would help to know what motor? Is it the main feed to the helm or somewhere else?
  4. alldodge

    Brand new cranking battery at 4.7 volts

    Something is draining the Bat. Bilge pump maybe, not running but pulling power
  5. alldodge

    Low fuel pressure, fuel filter half full while idling.

    The first pic shows the 2 lines going in/out This pic shows the box it's in
  6. alldodge

    Ideas on getting lake water temp sensor w/o drilling into hull?

    Had one in my younger days. Like I really want bend down and wait, I'm old, not going to happen
  7. alldodge

    AGM Starting Battery

    Yep'er same as LA type, no issues
  8. alldodge

    Ideas on getting lake water temp sensor w/o drilling into hull?

    Bet it don't tell ya how many beers are left in the cooler
  9. alldodge

    Bravo 1 low water pressure

    When cold my mechanical gauge (open cool, attached to block drain port) showed at around 7 psi cold. Thermostat opened and would see 4 to 5 psi. Cruising (3600 to 3800 RPM) would see around 25 to 30 and on end of year 2 on impeller would see 20 - 25 at cruise
  10. alldodge

    Bravo 1 low water pressure

    No The valves are below the exhaust Mans, and any place where there is a self drain check valve (Did I mention I hate self drain systems) :mad:
  11. alldodge

    Bravo 1 low water pressure

    Don't know for sure but I would Connect a garden hose to lower side. Turn water ON but at low flow. The check balls should restrict the flow a good amount
  12. alldodge

    Ideas on getting lake water temp sensor w/o drilling into hull?

    For me was to find out if it's warm enough to jump in :cool:
  13. alldodge

    Ideas on getting lake water temp sensor w/o drilling into hull?

    I had a deck drain that came out under the swim deck and ran the cable from the Dept/Temp sensor thru the drain. Tie-wrapped the sensor to the trim tab.
  14. alldodge

    My boat is being a boat . . .

    Bummer, how about swapping the pressure sensors
  15. alldodge

    Alpha One Gen II shift shaft seals

    Then looks like the original bushings are probably just as good as the new ones. Its all up to the seals.
  16. alldodge

    Alpha One Gen II shift shaft seals

    Are the seals in the bearing?
  17. alldodge

    Bravo 1 low water pressure

    Might be the check balls on the exhaust Assuming it's open cooled
  18. alldodge

    Bravo 1 low water pressure

    Serial number? Is the impeller new?
  19. alldodge

    HELP! 2015 Bravo 3 reverse shifting

    What's caused the warning buzzer to go off? Being a 2015 does it have digital shift? What's your serial number?
  20. alldodge

    HELP! 2015 Bravo 3 reverse shifting

    Is the gear lube bottle empty? When was the last time the drive lube was changed?
Top