Search results

  1. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

  2. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    Here are some pictures of those individual panels from painting. You can see many of the holes and lips where the panels are secured.
  3. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    The only solids are the ones attaching those lower side braces(below the rod holders) to the side of the hull. The flat panels behind them, along with those supports under the splashwell, are blind rivets and screws. No solids, no welding. They have screws into the deck, blind rivets into that...
  4. MNhunter1

    115hp 2 stroke on a Stracraft Mariner 21 ft?

    I think you'll be just fine with a 115hp on a 21' Mariner. They are not heavy hulls and the old 115hp 2-strokes are much lighter than the current 4-strokes. Prop it correctly for your needs and you'll be just fine. I have a 115hp sitting here waiting to go on my 18' MR and its the max rating...
  5. MNhunter1

    1976 Montego 16- The "Free" Puppy

    You can still find the rub rail, but it's not cheap. If it's not too far gone, I found the easiest way to reinstall them is soak the rubber in a big 5 gallon bucket or storage tub filled with hot water and some dish soap. It will make it more pliable and lubricated. Feed it into the rail...
  6. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    I went with a dedicated ATS 4X rivet gun. I've used a standard air hammer in the past and its fine for setting one or two, but well worth picking up an actual rivet gun if you have several solids to drive. As noted above, center punch the head of the old rivet, drill off the head as you would...
  7. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    Yes, and under the wood there is a tray running from the center console for all your wires and cabling.
  8. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    I went down this same road with my MR180, only way to do it right is to completely remove the side supports and rear panels. The front deck panels also had solids through the hull. I took the opportunity to purchase me a new rivet gun for setting the solids :) You'll also likely find some...
  9. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    Terminal blocks, bus bars, and fuse blocks are your friends when it comes to organized wiring.
  10. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    They all have foam, just a matter of what kind of foam is in your '82. My '84 had poured foam in the hull and the white Styrofoam board under the gunnels and behind the panels. I'd assume your '82 would be somewhat similar.
  11. MNhunter1

    82 Starcraft MR 180 floor, slight refit and leaks

    I'd personally stay away from the pour in foam and use the foam sheets. If yours is leaking, and has water trapped in the hull, you're likely to find corrosion and possibly even pin holes through the hull where you remove the original saturated foam. Look for spots like the picture attached on...
  12. MNhunter1

    2024 Starcraft Splash of the Year Champion!

    Congrats DW!!
  13. MNhunter1

    1997 Mirrocraft 18' aluminum fish n ski

    -17 here in MN at the moment, with a real feel of -24. They cancelled schools because of the cold. No snow.
  14. MNhunter1

    1969 holiday

    Nice! How's it sit in the water with the added weight of the Optimax and kicker on the back?
  15. MNhunter1

    1973 starcraft ss restore in progress

    I've always used Helmsman Spar on all my deck boards and just the epoxy on the transoms. They've all been covered with Nautolex as well, and screws and through bolts sealed with 3M5200, so there's the added protection there. I have used epoxy on any wood I have painted as it provides for a nice...
  16. MNhunter1

    1973 starcraft ss restore in progress

    I like contact cement as well, but still mechanically secure the edges with stainless staples.
  17. MNhunter1

    Shoestring Starcraft SS160 Resto-mod - let the long slow road begin

    I like the classic look of the stainless, but went with sort of a hybrid...
  18. MNhunter1

    Reflooring My 1986 StarCraft MR 220V

  19. MNhunter1

    Reflooring My 1986 StarCraft MR 220V

  20. MNhunter1

    Reflooring My 1986 StarCraft MR 220V

    Do you know the model year?
Top