Search results

  1. alldodge

    3.0L hard starting when warm

    The ring terminal is most likely used for something else that could be installed but wasn't like a Mercathode. Being black it should be a ground
  2. alldodge

    3.0L hard starting when warm

    The one on the left is alarm - Tan/Blue wire The one on the right is the gauge sensor - Tan wire Test gauge sensor but putting in a pan of water. Connect ohm meter and heat it up
  3. alldodge

    Mercruiser 350 poor performance

    The Reg is behind the motor mount on top. My guess is you have a 30 psi system. Could try to pinch closed the return fuel line going back to the filter. Do this without the motor running just cycle the key. What your looking for is to find out if you can get the pressure to go up to 50 psi...
  4. alldodge

    Electrical diagram ss18

    Not going to find a boat diagram. There would be a motor diagram, but need to know what motor?
  5. alldodge

    Delco voyager conversion

    That's good Then just the one connection between Dizzy and coil. Then just needs power from purple to run. The other connection on the coil would be for the Tach but its not needed to run
  6. alldodge

    Vacuum Gauge Connection

    Thanks I understand The big IF unless someone has an answer is to find a plug on the intake. If there is one on one of the intake runners then plug can be removed and fitting installed. If not, then its of no use. Could use a Tach but agree not as good for idle as a vacuum gauge
  7. alldodge

    Delco voyager conversion

    It has a connector between Dizzy and coil If you have an Alpha drive there should be a wire between the right connector on the Dizzy to the shift interruptor The Dizzy module gets power power from the purple wire which use to feed the TBV.
  8. alldodge

    Vacuum Gauge Connection

    OK, how do they connect a gauge?
  9. alldodge

    Vacuum Gauge Connection

    Sorry, but I must be missing something. Thought the 357 Alpha V4 is a EFI motor so there is no adjustment
  10. alldodge

    Vacuum Gauge Connection

    Why do you want to use a vacuum gauge?
  11. alldodge

    Delco voyager conversion

    Knock module does not need to be there. How was the Delco installed, as in where was the power connections made?
  12. alldodge

    2012 Axis

    I don't know either. If your on a hose, then the motor is not getting all the water it can. If your in the water and it still gets that hot, I just don't know
  13. alldodge

    5.7 mercruiser won’t start!!! Help help

    Real hard to read, would be nice to hit the return key every once in a while Which 5.7 do you have? I read carb, do you have a serial number?
  14. alldodge

    Fuel Delivery/starvation Help troubleshooting

    Sounds like you have corrosion issius and instead of finding where its taking place your running jumpers. Which 5.7 do you have? Original serial number would be best but at least Gi, GXi - E etc
  15. alldodge

    Mercruiser 350 poor performance

    Yes it is Gen 2 cool fuel, but look at the Reg for pink or blue on it
  16. alldodge

    454 magnum ecm

    Look on the back of the ECM my guess is it has either 16236009 or 16236999 which is a Delphi number for a MEFI-3. We cannot solicit to buy/sell/give but can post in the Offshore Only Wanted section. The 861721T2 is replaced by the MEFI-4 but it to is NLA. Bob at OBD Diagnostics can test and...
  17. alldodge

    3.0L hard starting when warm

    I would try disconnect the plug from the Temp switch. As before one side will have power until the motor starts, then it will be ground and go to zero. You could pierce the insulation but that can cause issues later if not sealed up If after the motor starts the lead goes to zero, you know...
  18. alldodge

    2012 Axis

    Don't know
  19. alldodge

    Mercruiser 350 poor performance

    Its hot riding a tractor You have a MEFI-3 but not positive its 30 or 43. The Reg spiking is ok so long as it doesn't go above 30 for a 30 or 43 for a 43. With the motor running it should be steady at spec. Merc used 16236009 first and then 16236999 later, just not sure when they changed...
Top