Search results

  1. Faztbullet

    Help with old evinrude

    Need to check voltage when running...if overcharging it will do this as internal parts overheat.
  2. Faztbullet

    Can’t find a part

    What the WMH number on carb?
  3. Faztbullet

    Why engine cut off when increasing the Accelerator?

    As posted clean and rebuild carbs
  4. Faztbullet

    Evinrude 115Hp V4 Project Rebuild / Repowering a Fourwinns Fling Turbo jet boat

    Yer going backwards...need a block with exhaust hump.
  5. Faztbullet

    400-650 Mercury Thunderbolt information needed

    A short shaft 50 is what ya need.
  6. Faztbullet

    2004 Mecury 90 hp wont start

    Rebuild the carbs.....
  7. Faztbullet

    Mercury 2003 115 4-strokeEFI

    TPS= Throttle position sensor
  8. Faztbullet

    70 HP vs 90 HP Evinrude: Which to Buy?

    I would go with the 70HP propped to ski/tube
  9. Faztbullet

    Mercury 2003 115 4-strokeEFI

    IAC behind upper intake runner ..but why is a piece of plastic tie strap stuck in the TPS??????
  10. Faztbullet

    1977 Evinrude 140

    Start your own post as this one is 11YEARS OLD!!!
  11. Faztbullet

    140hp evinrude OB rebuild help!!!

    If its a salty dog, just do a heavy decarbon on it and run it till it blows. 1977 should have the high ring pistons unless motor has been into. Too many V-4's laying around for pennies than waste coins on this dog. Also its only a 115hp at prop...
  12. Faztbullet

    Merc's 150 HP 2 Stroke EFI Motor.-

    There is no pressure in VST housing..only on outlet to injectors. Ya really need to get a manual so you understand how it works before you try repair.
  13. Faztbullet

    1995 mercury 200xri efi not wanting to get on plane

    Leave it on trailer for testing
  14. Faztbullet

    Merc's 150 HP 2 Stroke EFI Motor.-

    Filter on supply side lil to no pressure. Shrader valve is high pressure fuel pump.
  15. Faztbullet

    1995 mercury 200xri efi not wanting to get on plane

    Several things...stator,switchbox,rect/reg or fuel issues. First step is to check spark on both banks of cylinders when its acting up.
  16. Faztbullet

    Ignition question (new to Suzukis

  17. Faztbullet

    1993 Evinrude 150 Intruder compression

    90 psi is OK as it has compression relief in sleeve
  18. Faztbullet

    What am I looking at here?

    Skirt on piston broke or rod bearing failed cause rod or piston piece to ventilate block. Not worth much ..it a parts motor and not feasible to repair
  19. Faztbullet

    Need torque for prop nut

  20. Faztbullet

    Mercury 90HP Optimax- Air Compressor Rings (replacement)

    Buy a used one for parts as no parts sold to repair
Top