Search results

  1. Faztbullet

    CCA for a 30hp 2 cycle Evinrude tiller

    Nothing lower than 650CCA
  2. Faztbullet

    2018 Mercury proxs stops trimming about half way up

    Only trims up the length of trim rams under a load..about 5"
  3. Faztbullet

    Boat ignition

    Check the carbon brush and spring in distributer cap also...
  4. Faztbullet

    Need to identify my shifter

    That is a OMC shifter...
  5. Faztbullet

    vaule of 1958 Evinrude Lark 35

    $50-100 in my area
  6. Faztbullet

    Tohatsu 25hp vs 30hp? Repower

    I always suggest go to max rating...if a boat is rated for a 30 ..put a 30 on it.
  7. Faztbullet

    1988 Merc 200 HP Smoking during warmup.

    Is it a lil hard to start when you first go out?
  8. Faztbullet

    1985 115 lower unit merc

    Both units are cam shift and no adapter needed...
  9. Faztbullet

    Compresion gt 200

    That motor has a "open head " as we call it and builds compression as it runs.(see 1st pic) It is a non finger port motor and need to be propped to the 5200-5600 RPM range and luvs the petrol!! The later models after 91-1/2 have finger ports and tighter heads like picture below(for V-4 but same...
  10. Faztbullet

    1985 115 lower unit merc

    85 as is year or hp?
  11. Faztbullet

    Compresion gt 200

    Anything over 90psi
  12. Faztbullet

    2 Stroke Oldie Evinrude.-

    Wallhanger......
  13. Faztbullet

    1989 Johnson 90HP - Is This Block Repairable? (Chipped Ports)

    Replace all pistons.....the ring groove wears and lets ring roll.
  14. Faztbullet

    2017 115 4 Stroke Mercury outboard

    What kind of boat it mounted too?
  15. Faztbullet

    Searching far coil

    Here.. SEARS ESKA COIL SEARS by ESKA ignition coil SEARS 217.model # | eBay
  16. Faztbullet

    Considering New Boat

    A Chaparral 232 is a great boat for ya needs
  17. Faztbullet

    1989 Johnson 90HP - Is This Block Repairable? (Chipped Ports)

    Bore it .020 all cylinders, smooth and taper the chipped area. Need to replace all pistons.
  18. Faztbullet

    1990Yamaha 175 Steering Issue?

    Being a salty dog...sell it and move on unless you like lessons in heating,beating and broken bolt removal
  19. Faztbullet

    Mystery shim on drive shaft

    The tempering marks are normal from factory,,the shim was factory added most likely due to housing tolerance and preload specs not met. You will need to reinstall it
  20. Faztbullet

    2003 150EFI to a 2003 XR6 block

    Probably going to find it missing a few bolt hole off/missing on front air handler and alternator bracket also. Doubt is going to work
Top