Search results

  1. alldodge

    I found one leak (there may be more)

    First, boat is in the water and your adding a patch on the inside, so while it may hold for a while it will not hold long. If a patch is put on the outside (Temp pool patch or other) to stop the water coming in, then maybe something can be done on the inside. As with any kind of adhesive, its...
  2. alldodge

    Major hull damage , looking for tips

    That is a tough one, is it worth fixing, or sell the parts and find another Back to your question: Could make a template from the other side, build a mold and lay glass on the inside. Some folks on OSO do this kind of stuff a lot and might get some ideas from them Like this one...
  3. alldodge

    Johnson 7.5 Kill switch troubleshooting

    Sounds like you have tracked the issue as far as it can. Was hoping with all the folks who has looked at the thread they might offer some insight I'm unable to find a Johnson diagram for your model but the Merc works the same, may just be different color wires. When the Magneto is grounded...
  4. alldodge

    Fuel filter

    Look for Wix 33094 Best route is change the thing out for a spin on canister filter
  5. alldodge

    Volvo to Mercruiser

    Going to need to measure but looks like it might work, The link below will show what the 3.0 is which should put up close https://www.mercurymarine.com/en/us/documents/installation-drawings/
  6. alldodge

    Johnson 7.5 Kill switch troubleshooting

    Yes, with key in the OFF position the black/yellow should show zero ohms to ground. If its not then check your key switch Key should have a black yellow on a terminal and a black on another terminal. When the key is OFF the switch should connect the blk/yel to blk terminals. The blk terminal...
  7. alldodge

    357 mag bravo 4v long block replacement

    Might just be a head gasket.
  8. alldodge

    2002 Regal 2860 Commodore Listing Starboard

    Most all single engine cruisers list to starboard (mine also). The head is on the starboard side and the water tank is on the port side. If the water tank is filled, this helps right things a bit, but may not do it all. I don't worry about it, trim tabs flattens things while running Edit...
  9. alldodge

    Johnson 7.5 Kill switch troubleshooting

    Have you checked continuity of the Black/yellow all the way to here it goes?
  10. alldodge

    357 mag bravo 4v long block replacement

    The Merc 357 4V is a remanufactured 350 which has been bored. In short reman 350 vortec
  11. alldodge

    Vessel View Installation

    Good to hear, what was done to get it going? Can help others
  12. alldodge

    Am I crazy

    Pontoon not so much for waves Merc 375lb and Suz 416lb = 41lb difference
  13. alldodge

    Am I crazy

    Agree bad idea for another reason, the increased weight of the 4 stroke will slow you down. The added weight on the stern can also cause water to come in during a wave in because it sits lower Example of weight and speed Had a 205hp 4 dtroke seadoo and a 155hp 2 stroke seadoo, they had...
  14. alldodge

    Cutting cable TV

    It looks promising but also folks are saying use a VPN because not sure where its coming from They also recommend using bitcoin to purchase
  15. alldodge

    2020 Splash Of The Year nominations

    Scott's Rogue
  16. alldodge

    1992 Mercruiser 4.3L 262 CID Pre-Vortex Back Fires

    Just rebuilt, I would think valves. Assuming its a 1992 Valve lash is one additional turn after zero lash
  17. alldodge

    Wiring help for a 2009 Tohatsu MFS20CEPTL

    Starting on page 25 there is a wiring diagram https://www.tohatsu.com/tech_info/own_man_pdfs/Toh60C_70C_90A_120A2_140A2.pdf
  18. alldodge

    wellcraft not charging

    Agree Mando ALT This would be your wiring
  19. alldodge

    Johnson 7.5 Kill switch troubleshooting

    2 stroke Will run if the black/yellow is NOT grounded Will not run if black/yellow is grounded
  20. alldodge

    Johnson 7.5 Kill switch troubleshooting

    Should only see continuity if the motor is turned OFF or kill switch is pulled The power pack is grounded to kill the motor, and open to start it
Top