Search results

  1. Scott06

    My Boat cut out when I hit a decent size wave today. Merc A1G1 3.0.

    Shift plate. You just had the engine out for stringer and transom replacement ? Would start with what you oultined in first post batt cables , cannon plug. Could be any loose connection from battery up to helm /keyswitch back to engine. you can easily disconnect interrupt to test, just...
  2. Scott06

    Bravo 3 passed pressure test but fails vaccum

    Good point minor leaks in tubing etc really affect the performance of vacuum systems like oil extractors
  3. Scott06

    Leak on my Alpha 1 on shifter rod

    Honestly don’t care what you do, only offering what seems to work for others . sei Drives are about $1600 https://www.go2marine.com/SEI-SE106-Replacement-Sterndrive-1.81
  4. Scott06

    Leak on my Alpha 1 on shifter rod

    ok, OP is on land but sure...I forgot you do your maintenance while bungee jumping... Seriously maybe if you had a small copper tube on end of lube pump (or lube tube) that would let air out (while its in the vent plug hole) you could probably top up with out removing the cap? or remove the cap...
  5. Scott06

    Leak on my Alpha 1 on shifter rod

    Sure... as long as a bolt doesn't break or thread in housing strip, which can happen on older drives. Point I was trying to make if you are trying to skate through to end of season touch as little as possible, you would have seen the color of lube and how much it was down by how much more you...
  6. Scott06

    best place to get reman 5.7 mercruiser

    If you find one with hood compression and oil pressure probably would last, ten years who knows, depends on use. Just trying to offer an option at the price point you mentioned. Like I said if you want to keep it best bet is to get longer arms to reach deeper into the pocket As far as hp you...
  7. Scott06

    Leak on my Alpha 1 on shifter rod

    Excuse the bluntness but that makes no sense. You can but why ?? fill it from the bottom. Leave the vent cap on pull the bottom plug, put the pump in and pump till it comes out the vent. Big issue u want to see if water is getting in there
  8. Scott06

    best place to get reman 5.7 mercruiser

    they still make the pre vortec - 260 hp (w/ 4 bbl carb), 12 bolt intake , mechanical fuel pump GM changed over in 96 to vortec which has electrical pump. They take a year or so to work through Merc & the boat builder inventories to get into the boat. I believe they were roller cams since the...
  9. Scott06

    Leak on my Alpha 1 on shifter rod

    Exactly swap in the spare drive (would pressure test first) and don't mess with it. Do the seal work over the winter. I'm in upstate NY same thing its so short keep parts on hand and do the work over the winter. Had to rebuild jet pump on the sea doo last week, Had a rebuild kit on hand. 2 hrs...
  10. Scott06

    Leak on my Alpha 1 on shifter rod

    common for vertical driveshaft to damage the seal in upper when reassembling the two halves. to change out you need to remove input driveshaft (need big spanner to remove big nut. Input driveshaft bearings, gear come out. Remove top cover, then remove other gear in upper, change out seal. If...
  11. Scott06

    I/O (Sterndrive) Conversion to Outboards

    Yeah maybe talk it ovah wihge your boyz at Dunkies... Seriously really the only (boat swap) option given the costs and technology involved. I would love to try wakesurfing without buying a surf boat. We have a 21 ft BR that I repowered back in 2016, looked into converting to VP forward drive...
  12. Scott06

    Bravo trim rams on a pre-Alpha (MC-1)

    I think you are giving up too easy. if the seller advertise them as alpha one or MC1 cylinders and you can prove they are not by part number it is 100% worth reaching out to the seller and asking him to exchange. If he doesn’t make it right what do you have to lose by contacting ebay. personally...
  13. Scott06

    Mercruiser 3.0 Alpha One Gen 2

    Only way to really do it is remove the engine and pull core plugs. You can try filling and draining repeatedely but don’t think you’ll get much out
  14. Scott06

    Prop questions on a 16' 1976 StarCraft Montego (Merc 888)

    This is 100 % accurate don't buy props until you know this.
  15. Scott06

    Bravo trim rams on a pre-Alpha (MC-1)

    Did you tell the seller they were miss advertised? If they did nothing I would contact eBay if they were advertised incorrectly. when I recently sold a machine thru ebay for work ebay held the money until the buyer left positive feedback. Likely you have more leverage than you think if the part...
  16. Scott06

    MC-1 question

    yeah happened to me before too. I try to order order some other parts like drive gaskets lube etc what I need for winterizing
  17. Scott06

    Building a '93 Caravelle 1750 Classic Bowrider

    its the best thing invented for boating since the bikini ... My sea ray has it in the passenger console so no one is sitting on it. drains out side of hull.
  18. Scott06

    4.3L Carb Mercrusier Auxiliary Heater

    I think if you look at pictures of the intake the water fitting in cross over is on stardboard side to left of thermostat housing, under the hoses. there are two manifolds in this ebay add- I think what you have is the upper one pictured. Plug in water crossover is just below the thermostat...
  19. Scott06

    Terribly stoopid question

    I would find a way. I screwed my engine to a pallet hooked up a battery via some old cables, you can hot wire it at the cannon plug, put the fuel line in a small gas tank. if there are any leaks now is the time to find out. Was work done to the engines while they were out ?
  20. Scott06

    I/O (Sterndrive) Conversion to Outboards

    ok so weight savings thats impressive
Top