Search results

  1. bruceb58

    drive thump thump or chug chug sound

    How does it sound when you have it in gear and have the drive full right or left.? You can also do that out of the water if you are careful .
  2. bruceb58

    drive thump thump or chug chug sound

    It is normal maintenance to check alignment annually whether there is work done or not.
  3. bruceb58

    drive thump thump or chug chug sound

    You are not aligning your drive correctly. This two finger turning of the alignment bar is not how you do it. You push the alignment bar with grease on it and read the grease lines to see if its high or low. The two finger thing is just how much force it is to slide the bar in and out...not...
  4. bruceb58

    Snow Birds: Beware!

    We own two homes in the montains. Web accessed thermostats have prevented multiple occurrences of possible freeze damage since we have friends use one of the houses and I vacation rent the other. Also nice to be able to turn up the heat as we drive up the mountain to them. We always turn off...
  5. bruceb58

    Frozen Brakes

    If the breakaway cable was pulled, you could slide it backwards. From the picture you can see its all the way forward.
  6. bruceb58

    Frozen Brakes

    Does the coupler slide forward and backwards within its channel if you push on it? If it does, it is possible the breakaway cable was pulled. If not, jack up each wheel and see if one or more turn to find the offending caliper
  7. bruceb58

    1998 VP 5.0Gi looses power, maybe in protection mode

    Its probably a BY or an LK. Either one of those will use the same water pump. More than likely a BY. I don;t think they used the GM engine in LK model. Volvo part number 3857794...
  8. bruceb58

    Hydrolock, swim platform, riser height and static water line question

    If that's the case, you my possibly want to replace the risers at least. I believe in only buying OEM manifolds/risers. When DonS was still here(RIP) he also only used OEM.
  9. bruceb58

    Hydrolock, swim platform, riser height and static water line question

    Your manifolds and risers look fine. I assume this a freashwater only boat? I would not bother with a flapper at all. My boat sits just as deep as yours in the back and I have had very large waves hit the stern and never had the same problem as you are having.
  10. bruceb58

    Old air compressor?

    My friend, who is an ME, does product liability investigations. He represents the manufacturers. One of his cases was doing expert testimony on a Sears air compressor. The tank that exploded was due to rust damage from the owner who never drained his tank. The tank will explode long before a...
  11. bruceb58

    Old air compressor?

    I have an auto drain on my compressor. You hear stories of people who never drain their compressor tanks. They are the ones that have problems with their tanks.
  12. bruceb58

    Which Grease/Sealant between Outdrive and Bellows?

    You can use pretty much any kind of grease. The grease itself isn't acting as a seal. It just allows the cone of the drive to slide inside the rubber of the bellows easily.
  13. bruceb58

    Mercruiser 6.2's port runs rich

    Exactly....want to know if it's the new engine introduced in 2016 or not.
  14. bruceb58

    Lower gear oil on Alpha One holes sealed

    My bet...he stripped it and this was his hack fix.
  15. bruceb58

    Mercruiser 6.2's port runs rich

    Would be nice to know which engine he has before we start troubleshooting.
  16. bruceb58

    New Gimbal bearing won’t take grease

    If the holes didn't align right, there would be no grease going in past the ring...he is getting grease past the ring.
  17. bruceb58

    New Gimbal bearing won’t take grease

    If grease is coming out on the inner ring, you installed it correctly. I agree you need to rotate while greasing.
  18. bruceb58

    Neutra Salt System Solenoid and pully question VP 5.7 Gi-f

    Do you hear the solenoid click when you depress your switch?
  19. bruceb58

    Help with DPS-B 1.95 outdrive

    Absolutely positive. The 290 and older drives are completely different Starting with the joint venture with OMC on, always from the bottom.
  20. bruceb58

    Help with DPS-B 1.95 outdrive

    Yep...filled from the bottom. I would be worried though if you were down 1/4 of a qt though.
Top