Search results

  1. S

    johnson 70hp 2 stroke 1995 shut down when warm

    Here is what I mean, 3 to 4 hours south of the border drive from you.....maybe. I didn't see any in Vancouver but I'm sure they come up. Older 2 strokes are on the way out so if your patient, you can find a used one for fairly cheap. If used correctly they are very reliable outboards. The lower...
  2. S

    johnson 70hp 2 stroke 1995 shut down when warm

    With your limited knowledge that's a tough one. You could pull the head and see if the gasket let go. You would also need to know why it happened. Usually cheaper and easier to find a new used outboard. Sorry it happened to you.
  3. S

    1985 evinrude 30 hp prop power issue

    Omc manual with sync and linkage adjustments. For some reason I thought you said the butterfly valves in your carb weren't opening all the way. Anyhow, here it is.
  4. S

    1985 evinrude 30 hp prop power issue

    Try this link. Older motor so not sure it's the same but I think it might be. The 3rd thing he does with the rod on the side under the flywheel is making sure the butterfly opens all the way. Also, revving the motor in neutral doesn't work because there is no load on the motor.
  5. S

    Etec forum

    Yes, I wrote it down incorrectly. It's a P and not an F. That solves that issue anyways.
  6. S

    Etec forum

    I had to click around and then I saw it. Thanks again for all your help.
  7. S

    Etec forum

    I couldn't find that, I'll look again. Thanks for the help by the way and the pdf. As far as the model numbers, I know the conversion, it's when I went to the place to buy parts online it doesn't show my model...just some that are like it. I guess trim relays and motors are all the same that...
  8. S

    Etec forum

    I registered, but couldn't find a way to post a topic?
  9. S

    Etec forum

    Anyone know if there is still a forum just for E-Tech owners? I used to go through e Nation but when BRP collapsed so did E- Nation. I joined up for Barnacle bills and I read posts but I couldn't find a way to make a post. There's some stuff on the hull truth but I ended up having the same...
  10. S

    1975 25hp sneeze, and screw?

    This is a little out of my pay grade and I'm not sure if this applies to your older motor. I had an 83, 30 horse and you had to run what I'm assuming is the timing quarter inch past the lines. There was an Evinrude update on that. My motor was doing the same thing, sneezing that is and once I...
  11. S

    johnson 70hp 2 stroke 1995 shut down when warm

    No worries, just thought you might want to know. Model number J=Johnson, 70=hp, T=trim and tilt, L=Long shaft, EN=year. Here is the conversion.
  12. S

    johnson 70hp 2 stroke 1995 shut down when warm

    Your outboard is a 1992 by the way.
  13. S

    johnson 70hp 2 stroke 1995 shut down when warm

    Might try a portable tank if you know someone who has one.
  14. S

    johnson 70hp 2 stroke 1995 shut down when warm

    Get the compression numbers to make sure the engine is ok and then start the fuel check offs if the compression numbers are still good.
  15. S

    johnson 70hp 2 stroke 1995 shut down when warm

    Do you have a built in tank or are you using portable tanks?
  16. S

    1968 Evinrude 6hp - 6802C - Gearcase Seal Kit

    Here is something odd and I'm not sure it even helps. When I plug in 6802 in the where I buy parts, just like you it comes up 1967. But when I go to leroysrambilings his chart has it as a 1968. I think that guess of the 67 to 68 has to be the one but then who knows. Another thing, if you click...
  17. S

    1968 Evinrude 6hp - 6802C - Gearcase Seal Kit

    Tough one. Not sure if this helps but this claims to fit that gearcase.
  18. S

    1991 20HP Evinrude no acceleration

    Well in this long thread you talked about the engine running good but that the motor would jump into high rpm's and the boat would slow down (bad prop) then you quoted that you had a new pump never really saying it had heated up and then all this. Most motors when they heat up and you keep...
  19. S

    1992 Johnson 15 hard starting

    Put some wd 40 in the cylinders and turn the throttle wide open and run your test again. Make sure you pull it 5 to 8 times or so. Those reading are no good so check your work. Otherwise, yes pull the heads and hope for a bad head gasket. Most likely she toast.
  20. S

    johnson 70hp 2 stroke 1995 shut down when warm

    From what I understand octane is not an issue but stay away from ethanol.
Top