Search results

  1. S

    Hooking up tach on 1992 Evinrude 40hp

    2 cylinder motor under 70 hp should be a 10 pole.
  2. S

    J150EXECD shift cable vs throttle cable

    Glad you figured it out.
  3. S

    2003 Evinrude 250 FICT - Stumped

    Kill lanyard switch....another potential.
  4. S

    Drive shaft removal

    I've seen the home made puller jobies for the power head side but the gearcase side? It's bathed in oil?
  5. S

    J150EXECD shift cable vs throttle cable

    Ok, last post for me on this one. The part number you provide in the picture is one of the teleflex xtream cables. I couldn't find it. Teleflex and Seastar have joined each other and it looks like Sierra did to. I found Sierra teleflex cables with different part numbers. Quite a confusing go...
  6. S

    J150EXECD shift cable vs throttle cable

    The picture is not of a throttle cable and shifter cable, that is the old shifter cable and the new one. He says, if I'm interpreting this correctly, those are the orientations when they are both in the neutral positions.
  7. S

    J150EXECD shift cable vs throttle cable

    Mine also just run down the starboard side. To me, it would appear like you just installed it incorrectly in the box. Did you compare both ends before you installed? That would be the clincher.
  8. S

    J150EXECD shift cable vs throttle cable

    Trunnions both look like they are all the way back but maybe there is just more threads underneath.
  9. S

    J150EXECD shift cable vs throttle cable

    Sorry, still having a hard time evaluating. Picture is of two shifter cables next to each other. But they both can't be hooked up to the box at the same time. Are you saying that is what they look like when they are individually hooked up? (Old one is in the middle of it's range and new one is...
  10. S

    J150EXECD shift cable vs throttle cable

    To me it looks like your old one is in neutral or close and your new one is in the forward position. Are you saying you have both cables into a control box???
  11. S

    J150EXECD Looks like I need a new float?

    No they are allowed to make pure and simple junk. Stuff that doesn't work at all. Good stuff now days is stuff that works but doesn't last long.
  12. S

    Leaking water into cowl

    Double checked torque specs. Head bolts are in inch pounds as well which converts to 18.5 ft pounds. If you don't have an inch pound wrench I would again do them maybe by feel. Not sure a inexpensive ft lbs wrench will be that accurate. Better to torque them though. Also, picture on head...
  13. S

    2003 Evinrude 250 FICT - Stumped

    I apologize, I missed that you had replaced all of the relays. I would guess that the neutral locater needs to be closed in order to make the starter engage...by pulling the wire you opened it. I keep thinking about that ground (kill wire) but electrical gremlins are tough. I hope someone has a...
  14. S

    2003 Evinrude 250 FICT - Stumped

    This read is interesting. Might be your problem. https://www.thehulltruth.com/boating-forum/996809-evinrude-ficht-intermittent-no-start-solved.html
  15. S

    2003 Evinrude 250 FICT - Stumped

    I'm wondering key switch ground wire issue.
  16. S

    2003 Evinrude 250 FICT - Stumped

    Ficht motors are tough. I wouldn't think the emm would shut down the starter but maybe. Others my might know. I would have thought neutral locater too or short somewhere. Have you tried jumping the starter when that condition exist?
  17. S

    2003 Evinrude 250 FICT - Stumped

    So the starter won't crank correct? And if so you jiggle the handle and or wait awhile and then it will?
  18. S

    Motor swap- wiring questions

    Trim wires should be red, blue and green. Blue for sky (up) green for grass(down). Brown I believe is for temp....not sure your motor has that.
  19. S

    Leaking water into cowl

    For some reason I thought someone told you....if I can remember right, 18 to 20ft pounds on the head bolts and mechanics snug by feel on the jacket cover bolt. I think there 1/4 20 so not to tight. Snug, should be in inch pounds if you have that tool. Did you check head flatness?
  20. S

    Johnson 1999 J25pl3eem 25hp 3 cyl

    No spark obviously means electrical....you need to be more specific. Like after the 3 minutes I let it sit and then I can re-start it and it runs for 3 minutes again.
Top