Search results

  1. R

    Out to lunch Gear Oil Prices

    ???-----I do not get " hosed " when I make trips for medical care up here !!
  2. R

    Issues mounting this new (old) outboard

    Drill tight through.-----Use longer bolts.----sister those braces.----No such thing as ----" can't be done " ---on a boat !
  3. R

    Out to lunch Gear Oil Prices

    Water will be at the bottom screw.----If no water shows there then there is no need to drain it every year.-----Saves you some beer tokens.
  4. R

    Milky fuel in carb intake force 85hp

    Post the results of a compression test here.------And does spark jump a gap of at least 3/8" on a test device , yes or no ?
  5. R

    35hp (350M) electric start conversion

    Your location ?
  6. R

    1963 Mercury 350

    Perhaps it is the wrong thrust bearing for that particular prop.----Hurry and visit a shop.
  7. R

    2000 Johnson J90PLSSE LU identification

    ?----sure it is 1-1/4" ?
  8. R

    Issues mounting this new (old) outboard

    move / alter the braces inside your boat.
  9. R

    1963 Mercury 350

    no the thrust washer is big and is / was missing on your lower unit.
  10. R

    Out to lunch Gear Oil Prices

    One person complains about the price and the next person will say ---" oil is cheap "----Gear cases are sealed , if no water gets in the oil does not need to be changed every 100 hrs.------Oil is good for many seasons !!!
  11. R

    Out to lunch Gear Oil Prices

    A lot of good gear oil is thrown out !----If no water is present at the lower plug then just leave the gear oil in.-----Reseal gearcase if water gets in or gearcase is 15 years old.
  12. R

    1963 Mercury 350

    Thrust washer was missing !
  13. R

    Out to lunch Gear Oil Prices

    A lot of good gear oil is thrown out.-----Changed more than needed.
  14. R

    Milky fuel in carb intake force 85hp

    That milky stuff is normal !
  15. R

    HOW TO FILL POWER TRIM ON 1982 50HP MARINER NO RESIVOR ON PUMP INSIDE OF BOAT CYLINDERS ON EACH SIDE OF MOTOR

    fill on the reservoir.---easy to find on one ccorner
  16. R

    Johnson 1987 pistons

    Tim T----bearings on a Mercury are mounted different than on an OMC .-----Rarely find crankshaft damage on an OMC motor.
  17. R

    Johnson 1987 pistons

    Not a good idea to put new piston rings on used pistons.-----Yes the motor will run.----Many worn out motors run.----Doing a 1965 Mercury " panther " to help a dealer.----Found that crankshaft was worn , thus allowing crank to wipe out labarynth seals.----Resulting in the poor idle.----Owner of...
  18. R

    Staying warm on boat in the winter

    A sterndrive ?-----Get a heater hooked up to engine cooling system.-----See your dealer.
  19. R

    Boat going in reverse but not forward.

    Darn keyboard has a mind of it's own.-----Coupler
  20. R

    Boat going in reverse but not forward.

    SOUNDS----like shift rod needs to be adjusted at the couler.-----Hurry to a shop to save big $$$.
Top