Search results

  1. R

    2005 Johnson 15HP 4 Stroke will not accelerate.

    Check gear oil.----Try another prop.
  2. R

    1927 johnson k 35 ignition.

    On some early motors the cam to operate points is part of flywheel..----Therefor the crank does not need to spin to make spark.----Just like many modern motors.-----The crank does not need to spin to make spark.
  3. R

    2005 Johnson 15HP 4 Stroke will not accelerate.

    Try another prop on that Johnsuki.------Was lower unit off for water pump work ?
  4. R

    Positioning of shaft seals

    You are good to go and yes put grease between the seals.
  5. R

    1964 9.5 evinrude

    If cylinders are still like the pictures you posted the motor is scrap.----Need some good parts for a 9.5 then come over and pick them up.----It is ridiculous that any mekanik would say that motor is ready to run.---That is if pictures are a true indication of the motor today !!
  6. R

    1964 9.5 evinrude

    Why were pictures of a scored cylinder posted.--Or was that before you installed new O/S pistons in this thing.------You are not convinced that this motor is junk based on your pictures here??.
  7. R

    1964 9.5 evinrude

    He is convinced that he has a good motor.----His mekaniks told him.-----Who are we to try and convince him that pictures posted are a junk motor.------Maybe he is just having some fun with this thread.
  8. R

    timing

    These motors are famous for broken piston rings.-----Post your actual compression numbers here.----Keep them for future reference.----Replacing parts can get expensive in a hurry.
  9. R

    timing

    Why was timer base replaced?-----What is your motor doing / not doing.
  10. R

    Serial number

    Canadian model ?----My best guess is a 1975 model.
  11. R

    timing

    Model # of your motor?
  12. R

    1927 johnson k 35 ignition.

    I doubt that will work !!---Simple as that.----That will work on say a 1979 model Johnson 6 HP.
  13. R

    1964 9.5 evinrude

    edited
  14. R

    2000 Johnson 40 hp Won’t start

    Put 6 - 1/2 drops of fuel ( straight gas will do ) in each spark plug hole.----Put plugs in .---Crank it over to start.----Report what happens.
  15. R

    Force Outboards Rated By Model

    There are many different impellers today.-----Not the same 40 years ago.----Time to measure some shafts and housings .----Find a $20 one that will fit can be modified to work.
  16. R

    2000 Johnson 40 hp Won’t start

    Should be able to jump 3/8" ( 1 cm ) with ease.
  17. R

    2000 Johnson 40 hp Won’t start

    Do you push in the key and hold it in while cranking it over ?-----Yes , no or no idea how the primer valve works?----Filter is inside the primer valve.----Remove 4 screws to find it?
  18. R

    Steering cable wont bend enough to come out of outboard

    I guess I missed the part about the old man and the cripple in post #1
  19. R

    2000 Johnson 40 hp Won’t start

    Pushing the key in and holding it in while cranking it over ?----Does electric primer valve click when key is pushed in ?----Checked filter on electric primer valve?
  20. R

    Force Outboards Rated By Model

    At one time folks did not like the idea of a big outboard hanging on the back of a boat.-----It was deemed cheap and unreliable.-----The L-drive was a way of hiding the outboard.-----How times have changed !
Top