Search results

  1. R

    Johnson 48hp special Outboard running problems.

    LITTLE bits of information in your reply, means we can only be of LITTLE help to you.----Don't be shy, post all the information you can.----And answer questions.
  2. R

    Needing a broken spring/fuel

    385653 for assembly with spring.----only about $65.--------It prevents recoil from working if motor is in gear.---A safety device.
  3. R

    Needing a broken spring/fuel

    So you have about a 1972 to 76 model 20 / 25 HP.----Yes it has a fuel pump.----Find it on the starboard side of the block.----Follow the hoses to it.----
  4. R

    Lifting Boat off Trailer

    The boat that I am working had the bow eye installed with a wood block as backing.----Well it was a block when new and it was nothing but powder last year.----Now installed with solid ( no rot ) material.----Lift carefully if you trust the bow eye.
  5. R

    Johnson 6hp jumping out of gear

    Sorry I did not know that you are an " expert " on the shift connecter.----The drive hub inside the propeller.----I have a prop that I cut away for those folks that say ----" what are you talking about "
  6. R

    Johnson 6hp jumping out of gear

    Step #1 is to make sure the upper and lower shift rods are assemble correctly at the brass connecter.----What does oil in lower unit look like.-----Rubber hub in propeller could be slipping.----Keep using it and repairs will just cost more.
  7. R

    Lifting Boat off Trailer

    ??????--Use the winch to pull boat backwards on the trailer !!------Or you tie the boat to a hefty tree or similar.----Pull the trailer forward 18" or so.----Now you have room to block it up.
  8. R

    Lifting Boat off Trailer

    I have taken my 30' boat off a trailer by myself , with blocking and a 5 ton jack.-----No help other than a few small tools.
  9. R

    Wiring diagram?

    Small bet on item #9 being the overheat sensor.-----Grounds to the block to sound overheat horn.
  10. R

    Mercury kiekhaefer 650 No Spark

    That magneto does not need 12 volts at all.------So remove the bottom part of the magneto.----Those 4 bolts ( 3/8" wrench ) and inspect.--Remove cap and rotor carefully.------Usually cleaning breaker points and setting at 0.008 / 0.010" does the trick.----Test for spark before installing it on...
  11. R

    1989/1990 Evinrude 25 hp

    What parts are you looking for ?
  12. R

    Johnson 48hp special Outboard running problems.

    Any and all trouble shooting starts with a compression test.-----Post the numbers Here.-----Mixing gas and oil at 50:1 in the tank ?
  13. R

    1989/1990 Evinrude 25 hp

    contact------evinrudeparts.ca----Often free shipping on orders over $80
  14. R

    Outboard will only start when given 10%-30% throttle. Will not start when given full throttle or half throttle.

    I am stepping aside on this one.----I fear when 909 finds the issue we will see a post saying---" how come none of you experts knew that "
  15. R

    89 80 hp Mercury outboard

    Remove lower unit.----See if motor will turn.
  16. R

    89 80 hp Mercury outboard

    Check oil in lower unit first.
  17. R

    Need help with year and horsepower of this motor , Can someone please help me ?

    Decals tell me it is a 1984 or 1985 model.---Post more pictures of powerhead.-----4 cylinder , 3 cylinder or a V-6
  18. R

    Help with 95 Evinrude 15hp outboard

    Need to install a new impeller now.
  19. R

    Johnson J90TLCNB 1982 90 hp; speedy sleeve for driveshaft?

    try 0.875"----The shaft size indicated for the 321453 oil seal.
Top