Search results

  1. R

    83 Johnson 9.9 slipping

    Propeller must be turning when you shift this motor.
  2. R

    Blew my Lower Unit I think (pics included). Need help replacing

    SEI----Aftermarket is an option.-----Give them a call they will know what you need.-----Need opposite rotation.
  3. R

    Mysterious random misfire, VJ90TLASB

    I am not there to observe.-----Could be plug wires shorting to the cowling.-----Could be lower unit jumping in and out of gear.
  4. R

    Comparing the model number on 1979 Evinrude 115999R to the stamped # on the block

    If my only motor was a V-4 crossflow with 100 PSI.----It would come apart tomorrow for rebuild.
  5. R

    83 Johnson 9.9 slipping

    Does it rev up smoothly ( boat staying the same speed ) when the slipping occurs ?----Or does it jerk / feel like you hit something with the motor.
  6. R

    Comparing the model number on 1979 Evinrude 115999R to the stamped # on the block

    Test with another gauge.----Compression values are way too low.
  7. R

    OMC 120 Out Drive Impeller Replacement

    It separates where the blue arrow is pointing.----No need to remove pinion nut.------No need for a small atomic bomb to get at the impeller.
  8. R

    Oddball outboard ID

    A Tecumseh 2 stroke lawnmower engine of about 3 or 4 HP.----Marketed with various names.
  9. R

    Comparing the model number on 1979 Evinrude 115999R to the stamped # on the block

    What is your motor doing / not doing ?----The trouble shooting on an outboard starts with a compression test.----Just post your numbers.-----A powerhead from up to a 1998 model 115 HP would fit , so there is no reason for the numbers to be the same.
  10. R

    Mariner 115 serial 6632846

    Post some more pictures of this new---" AQUASITION "------Inside of transom and overall condition of boat.-----Hopefully you did not pay more that $1000 .----Depends on where you are.----I would not take this boat out in rough water.
  11. R

    Johnson 150 Rebuild/Remanufacture Guidance

    Running on the trailer at the ramp for 2 hours ???------What if you are running mud / sand through the water pump for 2 hours.
  12. R

    79 235 won’t start

    Perhaps check for sheared flywheel key.
  13. R

    Salt Away?

    Have to consult the 11 year old grandson.----2 years ago he did a science fair project.----Had salt and sand mixed together.----Added hot water to dissolve the salt then filtered out the sand.-----Boiled the water to get the salt back.----Think I will have him try to do the same with some...
  14. R

    1967 evinrude 80 hp need help.

    You will find the shift rod o-ring when you take the case apart !
  15. R

    Spun prop hub: Replacement or buy new?

    ??____The question is ----Did the motor rev up suddenly , but the boat did not speed up.----You might have more issues.----What motor ?
  16. R

    Spun prop hub: Replacement or buy new?

    So when you put motor in gear the boat would move ?-----Then at some point the motor would rev right up but boat would not go any faster ?----Motor is in good condition ?----How fast did the boat go for you last season ?
  17. R

    1967 evinrude 80 hp need help.

    Including o-ring on shift rod.
  18. R

    1967 evinrude 80 hp need help.

    A 50 year old motor.----Replace all seals and o-rings on it now.
  19. R

    remote control for my old outboard

    Your location ?---I might not be too far away.--
  20. R

    1983 Johnson 60 dies when throttling up

    I am trying to assist you with bad compression test results.-----Not appreciated / understood I guess.-----Good luck with your motor.
Top