Search results

  1. R

    9.5 johnson motor tag gone

    The 69 model had gold coloured decals.----The 68 models did have a wee square plastic applique if I recall.
  2. R

    9.5 johnson motor tag gone

    The paint colour eliminates 1967 as the year.----Any pictures ( 3 ) of the cowling ?
  3. R

    Hard Start 15 hp

    Fairly common for folks to install the choke knob upside down.----So remove silencer cover.---Pull choke out and verify that choke is CLOSED and stays closed when you pull the starter cord.
  4. R

    What Is this fitting/fixture for?

    What boat ?----What drive is in there now ?-----Looks like the steering anchor for an OMC sterndrive with the external steering cable.
  5. R

    Do I have a 'nice' engine?

    Post 3 pictures of powerhead with cowling off.
  6. R

    Johnson 150 Rebuild/Remanufacture Guidance

    Some will argue.-----I use 220 grit only.---Strip about 1/4" wide.----Work it gently to establish a cross hatch finish..-----No need for finer grit to have a mirror finish !!-----I do the same procedure on lower unit shafts.
  7. R

    06 F115 won't plane up

    Spend a few coins for a marine dynamometer test.----Find a dealer that has one.
  8. R

    Do I have a 'nice' engine?

    The cowling tells me it is a 1980 model.-----An excellent motor when it left the factory.----Condition is everything when a motor is 40 years old.
  9. R

    Johnson 150 Rebuild/Remanufacture Guidance

    Some would argue-------I use 220 grit polishing cloth strips.----Lightly polish that and put a crosshatch pattern on those journals and bore of the rods.----Been doing that for years.
  10. R

    Do I have a 'nice' engine?

    They sold a lot of them and they are a good motor.---Easy to maintain.---Newer models had better crankshaft material.----Thicker wall piston skirts on newer models.----Your model # is ?
  11. R

    New boat owner

    Some boat like this example are much easier to repair that boats built in the 1990's.----Just my opinion.
  12. R

    Johnson 30hp outboard

    You must use the correct switch and wire it up correctly.----Expensive damage will result if mistakes are made.----Part # of the factory switch that you installed ?-----Pictures of wires installed on each terminal.-----Colour of wires on the " M " terminals ??
  13. R

    1996 Johnson Outboard not starting

    Are you pushing the key in while cranking it over ?-----That is if it has the electric primer valve ( thingy with the red lever ) installed and working properly.----And 90 PSI would be low for a 4 stroke engine like that.
  14. R

    Help

    Sorry-----The above testing must be done by you.
  15. R

    Help

    It just sounds good on the muffs to the untrained ear.-----I suggest you do a compression test.---Follow that with a test for spark.-----Good spark on those will jump up to a 1/2" gap.----Might be running on 3 of 4 cylinders.
  16. R

    2001 Mercury 60hp Bigfoot

    This " old Mercury mechanic " is correct.----It seems that young folks do not know simple basics these days.---Sorry , my observation.-----First you need to post what is on the motor now.-----Then test the motor on YOUR boat to determine the correct prop for it.-----Thank that --- old Mercury...
  17. R

    shifting issue with 1999 150 johnson

    Not an issue with the o-rings.-----The issue would be corrosion products jamming the hole where the rod goes through.-----The white powder is ALUMINUM OXIDE.-----Aluminum combined with oxygen.-----Now more material in there ( oxygen ) thus it jams stuff up.----Some would scrape that...
  18. R

    Johnson 150hp 1999 J150PXEES

    Test with another gauge.----You have a bad gauge or something is wrong with the motor.
  19. R

    Johnson 60 Flywheel only turns counter clockwise

    Not the impeller.-----Broken pinion or clutch dog.
  20. R

    Newbie Fuel line questions

    Chinesium parts and everything fits.-----3/8" hose was often specified for V-6 motors.-----5/16 is adequate for smaller motors.
Top