Search results

  1. Vic.S

    6 Gallon OMC Metal Fuel Tank

    Almost all the parts are available. Which part is cracked, the tank connector 174508 ? If so that is one of the very few parts which may not be but ITYWF it can be replaced with the fuel hose connector kit 0176745 if necessary but perhaps not from iBoats. I doubt if repair will be possible...
  2. Vic.S

    15hp evenrude two stroke

    Its just a flat plate isn't it
  3. Vic.S

    Plunge Choke etc

    The parts lists show a manual primer pump for 1989 models, similar to the one in my previous post but don't list an electric start model . Maybe not original. On the engine FAQs board there are instructions for starting with various choke/primer systems. For the manual primer pump the...
  4. Vic.S

    1994 OM. factory manual for my 1995?

    It's a production suffix which might identify any mid year changes. Always quote it when ordering parts but otherwise ignore it unless you come across the same model with a different suffix.
  5. Vic.S

    Plunge Choke etc

    This appears to describe the use of a manual choke. Electric start models usually have a solenoid operated ordinary flap type of choke while rope start models have the same type of choke operated manually Id assume by "plunge" choke the " guy " who rebuilt the carb meant a manually operated...
  6. Vic.S

    Plunge Choke etc

    Deleted
  7. Vic.S

    8hp Johnson water out of exhaust

    The cooling water mixes with the exhaust. Most leaves underwater with the exhaust where you wont see it. Some will be blown out of the back pressure relief port on the back of the leg. Check the compressions as advised. Check that it is firing on both cylinders. How good are the sparks. They...
  8. Vic.S

    spark plug gapping

    The recommended plugs for that engine are now Champion QL77JC4 or QL82C gapped at 0.030" When new it would probably have had QL77J4 plugs gapped at 0.040" QL77JC4 replaces those and sometime in the 1980s the recommended gap was reduced , across the board to 0.030" Nobody now seems to...
  9. Vic.S

    Carb float drop

    Provided the float drop is between the max an min figures it will be just fine. If it does not drop far enough the valve will not open fully and you may be starved of fuel' If it drops too far there is a risk thet the needle could fall out of the seat or be pushed sideways and jam The most...
  10. Vic.S

    Fuel Nipple on Carb Broke (Johnson 60hp)

    ITYWF that is older than 1998 but its no help The fitting does not seem to be listed as a separate part If you have just broken the hose tail off and its brass it could be repaired if the other part is serviceable Other wise find a friend with a small lathe who can make one for you. .
  11. Vic.S

    Service Manual

    Outboard books .com https://www.outboardbooks.com/manual/E60TLED/Evinrude/
  12. Vic.S

    2000 115 johnson ocean pro battery connections

    No takers in nearly 2 days Look at the solenoid. There will be two large terminals and two small terminals One of the large terminals will have the connection to the starter motor on it The other one will have some smallish , probably red, wires on it. The battery positive connects to this...
  13. Vic.S

    propeller seal removal

    Sorry I should have suggested you read this article back home on YBW https://forums.iboats.com/threads/oil-leaking-around-lower-unit-by-iwombat-verified.206038/
  14. Vic.S

    Johnson sail master

    The cutouts are hidden by the anti-ventilation plate in the diagrams but the extensions for the "sail" versions are listed in the parts lists 68 0396032 EXTENSION ASSY.. 8SRL Only 1 68 0396307 EXTENSION ASSY.. 6SL Only 1 as is the standard 5" extension 59 0396308 GEARCASE...
  15. Vic.S

    Johnson sail master

    I have a 6 hp Yachtwin ( The Evinrude equivalent of a Sailmaster) The exhaust outlet behind the prop is plugged . There are alternative exhaust outlets in the special 5" extension . This allows the engine to be mounted on a sailing boat with the prop 5" deeper, so that it does not lift from...
  16. Vic.S

    OMC/Evinrude fuses

    They are no longer available as OMC spares . They are available as Suzuki parts, but if they are standard automotive blade fuses there should be no problem obtaining them anyway. It is surprising that your dealer could not supply suitable alternatives or direct you to a source
  17. Vic.S

    Gear oil change ?

    I think you will find there screws plugs are slightly different depending on whether the are intended to have O rings or flat washers. The underside of the heads is flat if they are for the washers but there is a recess to retain the O ring if they are for O rings. Basically it allows the heads...
  18. Vic.S

    Gear Oil Everywhere

    Open and read this article this from the engine FAQs board https://forums.iboats.com/threads/oil-leaking-around-lower-unit-by-iwombat-verified.206038/
  19. Vic.S

    1996 Tohatsu/Evinrude 9.9 4 stroke oil change

    I cannot find either of those model numbers but the drain plug is #24 in this diagram
  20. Vic.S

    Charging kit for 1990 8hp Evinrude?

    No Probably the same rectifier but very different stator coil . Why not check them all out under OB accessories on the BRP parts website at http://epc.brp.com/Index.aspx?lang=E&s1=5868fbf1-fe3b-4e28-baa7-c9db6c586a9a
Top