Search results

  1. M

    Trim Manual

    I am talking about the drive trim system ( pump and rams ) I was speaking of the remote control for the shifting and throttle. I was just making a general statement, ( I know they have a separate manual for the controllers ) This statement was just to say they had a separate manual for the...
  2. M

    Trim Manual

    Makes since for it to be in the drive manual I guess since that's where I would look for the parts lookup. Thanks
  3. M

    Trim Manual

    I'm not working on anything at the moment I was just asking a general question on what manual would be considered the manual for the power trim. I know they have a separate manual for the controllers and I didn't remember ever seeing one for the trim so I asked.
  4. M

    Trim Manual

    Here are snippets from service manuals 18 and 25 neither of them have it.
  5. M

    Trim Manual

    Ok so quick question what manual has the trim trouble shooting and repair info in it ? Thanks Mark
  6. M

    Clicking tilt trim and now blowing fuse ? 50 Mercury 2 stroke

    Pump locked up or bad motor possibly..does it do it up and down. ?
  7. M

    Difference between 1997 & 1998 90hp 2 stroke outboard

    The welch plug should look something like this and located on top of the cylinder head
  8. M

    Trim Pump Fluid

    I use ATF or hydraulic fluid in mine never had an issue
  9. M

    1992 Mercury 60HP 2stroke Constant Alarm

    Your assumption would be correct it is the for speed odometer and the warning module is for the oiler as well if it's still being used then replace it ( if you premix the gas ) then toss the module
  10. M

    Force 70 hp questions.

    Also on top of the head there should be a quarter size plug with a number on It that would be the serial number
  11. M

    Barr manifold carb gaskets.

    On mine I cut the gasket no need to be there if it's not sealing anything
  12. M

    Engine lift point - Lifting Eye question

    That's a great idea 💡 I'm normally fighting bolts and chains
  13. M

    Gimbal Bearing Cheap

    Yeah I was just going to pull it and toss it. Your right when I pull the drive after the season I'll just replace. 30 bucks is cheap enough
  14. M

    Gimbal Bearing Cheap

    It says GLM for Manufacturer and RPS for brand
  15. M

    Gimbal Bearing Cheap

    I marked the face of the bearing and it lines up with hole at the grease nipple Should I pull it and double check?
  16. M

    93 OMC Cobra 5.0 EFI

    That's what they cross to according to sparkplug cross reference website Just to be safe I would bring one of your pistons all way up and put a wooden dowel in the hole to measure how much room is in between the piston and top of threads and go from there
  17. M

    Gimbal Bearing Cheap

    I did install it I just hope it holds up 🙏 🙏 🙏
  18. M

    Gimbal Bearing Cheap

    Also in the reviews there have been a few comments about it being a sealed bearing
  19. M

    Gimbal Bearing Cheap

    The hole is in the outer ring But once you install it into the transum and try to pump grease in there it is very hard and the grease starts coming out from the outer edge of the ring not the bearing the bearing itself is sealed
  20. M

    Gimbal Bearing Cheap

    Hey alldodge I just purchased and installed this bearing last week haven't had it out yet but I can tell you the bearing isn't greasable. It has the hole in the outer ring but I believe that's as far as it goes ..
Top