Search results

  1. flyingscott

    Disconnecting the fuel line, let engine burn gas ?

    That is also an old wives tale. When Evinrude went to 50-1 in 1964 they did not re engineer the whole line. Just changed the oil. When they went to the E-tec, they used the existing 60 degree block.
  2. flyingscott

    Disconnecting the fuel line, let engine burn gas ?

    That is an old wives tale. Here is why how many motors ran out of gas water skiing or any other activity?
  3. flyingscott

    50 hp OMC triple vibration at lower rpm

    Check your stator and flywheel. Do a compression and spark check. Is the link and sync correct? Outer layer still on the cam roller?
  4. flyingscott

    Delete

    Pulls straight out has o-rings on both ends.
  5. flyingscott

    Lehr 5 hp piston rings

    You could find whatever Chinese company made the powerhead and see if they have parts. That is nothing more than a 4 strk with a fancy fuel system.
  6. flyingscott

    2002 mercury 40 hp 2 stroke

    I can pretty much guarantee you are not idling at 25 degrees. Look to make sure the carbs are opening all the way. Do a spark test and compression test. if they put CDI parts on, a thorough test of those are in order.
  7. flyingscott

    98 xr6 150 backfire issue.

    Are your carbs adjustable?
  8. flyingscott

    25CM water pump issues

    What is your serial # or yr?
  9. flyingscott

    Disconnecting the fuel line, let engine burn gas ?

    It depends on the 2 strk and the injection system. If your motor injects into the fuel line as a VRO or most Mercury carbed motors do, then I would not. Simply because the oil pump is still pumping so you fill the line up with oil. Older Yamaha, Suzuki systems inject behind the carbs so that is...
  10. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    well I can tell you ebay has the best prices
  11. flyingscott

    Getting more from 6hp in High Altitude

    sell the 6 hp and buy a bigger motor
  12. flyingscott

    My 1975 Johnson 40hp does not have a thermostat

    Regardless of it having a thermostat or not it should be pumping water. Revisit your impeller work. It also does not need the prop on to pump water.
  13. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    Get the serial # and look up the part #
  14. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    Ask the owner to send you a pi of it?
  15. flyingscott

    2 stroke 70 hp that hesitates at acceleration

    Running in neutral means nothing. Does spark jump a 7/16 air gap? Carbs opening all the way? Have you tried a different tank and hose? Link and sync done? Roller on the cam have it's outer layer? What is your compression? Timer base moving freely?
  16. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    How many pins on the plug on the motor?
  17. flyingscott

    1985 50HP 4-cylinder power loss

    Do another compression test and make sure your starter is turning fast enough. All plugs must be out for a compression test. If you are using the autoblend system throw it away as soon as possible.
  18. flyingscott

    Link 'n Sync help - '84 Johnny 90hp

    The joe reeves method works well. Just make sure after you timed it you tighten the lock nut down and double check it.
  19. flyingscott

    Link 'n Sync help - '84 Johnny 90hp

    You don't care about idle timing, which is stated in the Joe reeves method, You set idle speed in gear and a warm motor on the water.
  20. flyingscott

    Johnson 150 v6 - fuel pump location

    No the pump itself is mechanical. The electrical harness is for the no oil flow sensor.
Top