Search results

  1. flyingscott

    2001 Mercury 90hp 2 stroke wont start / idle

    Keep pumping the primer ball and see if it keeps running.
  2. flyingscott

    Can’t give any throttle

    Clean your carb again.
  3. flyingscott

    Seems to run out of fuel

    Low speed needles on the side of the carb, How many turns out from lightly seated are they?
  4. flyingscott

    Seems to run out of fuel

    What are your low speed needles set at?
  5. flyingscott

    No pee Johnson outboard

    You need a new impeller sanding it down destroyed it. Have you tried to unplug the pee hole? Maybe as simple as it is plugged up.
  6. flyingscott

    Somber news for iboats forums members.

    He will be missed.
  7. flyingscott

    GREMLINS

    Check the throttle rollers. Make sure it is in one piece.
  8. flyingscott

    Where can i get a new controls and harness for a 71 selectric shft

    Where are you located?
  9. flyingscott

    1999 mercury 90 HP 2 stroke quit on the water!

    What happens if you just pump the primer ball?
  10. flyingscott

    Glastron GT-150 Ideal Prop for Slalom Skiing

    Didn't 007s boat have an 85 hp V4 on it?
  11. flyingscott

    '93 2-stroke 15hp won't start, has run recently.

    Are all the parts for the primer knob in good condition? They do like to break and will not pull the stator forward.
  12. flyingscott

    9.5 johnson outboard 1965 back fire

    Open the low speed screw on the carb an 1/8 of a turn at a time until it goes away. It sounds like a lean sneeze.
  13. flyingscott

    Fuel oil mixture ratio

    If the VRO is not working you mix at 50-1 with TCW3 oil
  14. flyingscott

    1989 90HP Mariner

    And get a big garbage can and some salt away to try and clear the passages. Take any thermostats and poppet valves out when you do it.
  15. flyingscott

    1989 90HP Mariner

    Look in the oil tank. those motor are notorious for the magnet falling off and setting off the alarm.
  16. flyingscott

    Need more power

    I personally would buy the 10 hp motor as long as it is in good running condition. OMC took a step back with the 9.5 hp as far as maintenance costs and performance are concerned. If you want to fix your 9.5 check for spark on both cylinders you could be running on 1 cylinder. Also try running...
  17. flyingscott

    '93 2-stroke 15hp won't start, has run recently.

    Turn the knob all the way to the right after you prime it. That will give you a high idle to warm it up.
  18. flyingscott

    '93 2-stroke 15hp won't start, has run recently.

    Is this a tiller or remote model?
  19. flyingscott

    '93 2-stroke 15hp won't start, has run recently.

    What is your starting procedure?
  20. flyingscott

    '93 2-stroke 15hp won't start, has run recently.

    What about spark? Have you checked? Look at the carb base gasket make sure it is the correct one. And make sure it is on correctly, all holes must line up.
Top