Search results

  1. flyingscott

    1986 Johnson 30 water pump

    Did you put the key in the impeller? Water tube lined up correctly?
  2. flyingscott

    86 Johnson 28 Surging

    What happens if you pump the primer ball? Has the carb been worked on recently? Fuel pump worked on? Put up a pic of the motor and transom. Are you running a shortshaft on a longshaft transom?
  3. flyingscott

    63D orfice high speed jet?

    I agree the jet is not the issue. Can you not message the ebay seller for more info? The size will be stamped on the jet.
  4. flyingscott

    63D orfice high speed jet?

    Ebay has them. seller has 3 left $10.00 simple search to find them. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=0328544&_sacat=0&LH_TitleDesc=0&_odkw=328544&_osacat=0
  5. flyingscott

    25hp mercury tracker cranks but will not start

    Did you do post #17
  6. flyingscott

    91 Mercury 100 won't run past about 1800 rpm

    Yes if you have the Factory manual you were told to buy
  7. flyingscott

    What year is this Scott outboard?

    1962 14 hp
  8. flyingscott

    96 johnson 20hp temp switch

    I do not believe that has a temp switch or failsafe. I would do a compression test before anything
  9. flyingscott

    First tiller motor

    That hose is not right should be about a 1/4" Id at most. To fix the fuel pump buy the complete carb kit that has the primer also
  10. flyingscott

    2001 Mercury 25hp POWERHEAD

    Rebuild it yourself. The kits and the manual are available. The hard part might be finding a shop that can do a blind Mercosil Bore.
  11. flyingscott

    35 hp johnson one cylinder no compression

    Except for the fact both Fire rings would have to be blown, and one cylinder has compression so Not so sure its a split head gasket.
  12. flyingscott

    Source of Oil Leak

    My bad did not read your comment all the way. Brain fart on my part you are correct
  13. flyingscott

    Source of Oil Leak

    You cannot run out the bottom carbs on that motor ,unless you are above 1800 rpm Make sure the airbox gasket is in good condition and the hose is connected to the crankcase
  14. flyingscott

    1983 evinrude 9.9 2 stroke idle speed setting

    Make sure the snap ring is on tight and the knob is not pushing out. You may need to modify the adjuster I have never seen one that actually worked correctly. leeroysramblings.com has a lot of good info on those.
  15. flyingscott

    cold start issue

    Is this a looper or a crossflow? V6 or V4? Is this another Vr0 pump or a standard pump? If it is a standard was the pulse limiter removed?
  16. flyingscott

    2000 Johnson 200 runs reverse( fly wheel spinning backwards) HELP , ITS CURSED!!

    Put up Video of this. Does your motor have the OIS ignition?
  17. flyingscott

    1980 johnson 9.9 bogs down when trying to go to full throttle.

    What happens when you pump th primer ball on the fuel line? Primer ball on correctly arrow facing motor? Try opening the low speed screw another 1/4 turn open.
  18. flyingscott

    69 Johnson 25

    Try a different prop
  19. flyingscott

    Oil Injection Kit?

    Yeah that was a good system. Don't ever use one of those they were terrible.
  20. flyingscott

    Idle adjustment knob

    It is not an idle knob it is a throttle lock to set a speed for trolling. Clearly stated in owners manuals from OMC.
View older results
Top