Search results

  1. flyingscott

    evinrude looper lower unit help

    I do not believe looper lowers and crossflow lowers interchange at all.
  2. flyingscott

    Looking for info on Power Products 1.5hp?

    and there should be a muffler.
  3. flyingscott

    1995 Evinrude E115ELEOC timing issues

    No the analyzer is used to time the engine!!! I have the exact same motor with the factory manual.
  4. flyingscott

    Yam F300 vs. Merc Verado 350 vs. 383 MPI

    how much weight do you think you would actually save? The Verado set up at 870#s doesn't include the extra bracing you need for an Outboard conversion. Not to mention the repairs an a small block Chevy will be significantly cheaper than the Verado. Not to mention the small block will be simpler...
  5. flyingscott

    1995 Evinrude E115ELEOC timing issues

    I am not so sure you can use the joe reeves timing method on that ignition. There is an actual timing tool for the optical ignition system.
  6. flyingscott

    1990 25hp Johnson

    Which way is the red lever facing on the primer? You push the key in while starting. Doing it 8 seconds before does nothing.
  7. flyingscott

    Johnson 70 3cyl overheating

    edit
  8. flyingscott

    Johnson 70 3cyl overheating

    So is the motor being limited to around 2800 rpms?
  9. flyingscott

    Fleet Scott 14.1

    Depends on the size of the laminate. The square in the middle measure it.
  10. flyingscott

    2017 Evinrude

    one other thing to ask the owner is the oil setting. That determines which oil to use. If I was buying it I would take it to a dealer and have them set the pump as rich as possible. then run the best oil you can find XD 100
  11. flyingscott

    2017 Evinrude

    there is an oil tank on that motor that will need to be filled periodically. but you should read the manual
  12. flyingscott

    60 HP SCOTT ATWATER DRIVE SHAFT

    ok sorry
  13. flyingscott

    93 Mercury 15 HP vs 92 9.9 Carb?

    Then they may not be the same block the first 9.9 were on a 13 cid block I think or 10. The 15 came out on the 15 cid block. Some work on your part is required.
  14. flyingscott

    Replacement starter coils '58 flying scott 60

    3 sets of points on that motor. Same as used on Mercury and briggs and stratton. Easy to find. Vintage coils are expensive you could try Laings outboards.
  15. flyingscott

    93 Mercury 15 HP vs 92 9.9 Carb?

    You will have to compare the blocks. That was right around the time the 9.9 moved up to the bigger block. If the 9.9 is the smaller block I wouldnt use it without at least changing the high speed jet. Even if it is on the bigger block may still need the jet will have to look up some parts.
  16. flyingscott

    Save or part out?

    They never had electric fuel pumps. They are listed in the service manual but that was around the time McCulloch bought them. I believe they nixed the electric pump. I have an early 58 that still has Scott Atwater on the hood and has a pulse pump like yours. The hood latches break because people...
  17. flyingscott

    93 Mercury 15 HP vs 92 9.9 Carb?

    Look at the middle of the bore and make sure it doesn't narrow in the middle.
  18. flyingscott

    1990 150 HP V6 Leak Down Fail. Help!

    You have to replace the pistons. Do not replace just rings on that motor and you have to do all 6. But pull the heads first.
  19. flyingscott

    1990 150 HP V6 Leak Down Fail. Help!

    If it cant be torqued they are junk. Do what racer said
  20. flyingscott

    1990 150 HP V6 Leak Down Fail. Help!

    How did he do a leak down test on 2 stripped spark plug holes?
View older results
Top