Search results

  1. A

    Boat Disposal

    Some of my famiky are in the medical business, nurses paramedics etc. Many horror stories from fiberglass inhalation, I wouldn't take a chance. !!!
  2. A

    Blige pump problem!

    According to Johnson Controls battery engineer, the 50% is for a deep cycle, regular flooded cell batteries ( starting type) should not be drawn down below 75% capacity for longest life. A regular starting battery will be killed after drawing down to 50% a couple times. Hope this is an...
  3. A

    Moves slow

    Is the rpm at wot when in the water?? What type of boat is it on ??
  4. A

    Asking alot of a little outboard. best prop pitch?

    If running right and right prop ut should move you along at a decent pace. Your not gonna ski or pull a tube but slow cruising speed should work ok. I had a 22' cuddy cabin and had a 9.9 kicker motor on the back. With a low pitch prop I could reach almost 12 mph in calm conditions.. Your 40...
  5. A

    Blige pump problem!

    Why not stop the water going into the boat, seems that might be a better solution !!
  6. A

    1968 Slickcraft 19 foot Just Purchased!

    She has had water in it, you can see it on the wood in the fuel tank pictures. Anyway, hope you stay lucky with it.
  7. A

    Boat Disposal

    If you do decide to cut it up....by all means use a good quality resperator, fiberglass particles are NOT good in any way !! Serious lung issues will develope !! Hope you are able to sell/ give it away...
  8. A

    Furst boat and first restoration project, have some questions.

    Hitting the rev limiter in neutral will shorten the engine life for sure, not a wise thing to do !!
  9. A

    1968 Slickcraft 19 foot Just Purchased!

    Great, does your puppy enjoy the boat?? Keep us posted as you get her up and runnin !!
  10. A

    1968 Slickcraft 19 foot Just Purchased!

    Not really, having been around boats for well over 60 years, a short info story and a couple good pics will show rot about 90-95% of the time has been my experience, haven't missed one yet !! I realized how easy it is for a glass boat to deteriorate once I owned one back in 1967. Never owned...
  11. A

    Boat Disposal

    More curious as to how it got in there like that ???
  12. A

    Looking for lower unit drain/vent plug gaskets

    Ebay and Bass Pro shop. BP was 6.99 for one screw and two gaskets
  13. A

    Cut away....

    That would be awesome to get !!! I am jealous...
  14. A

    Furst boat and first restoration project, have some questions.

    Also check your prop for damage and correct pitch. Mabey borrow a portable tachometer to see if motor is running at its peak. I would guess you should get around 22-25 mph when everything is up and running
  15. A

    Stripped Anode Bolt

    Great to hear...
  16. A

    Stripped Anode Bolt

    Drill with a left hand drill bit, as it drills the bit may grab the screw and unthread it....if not, the a complete drill out and retap might be needed, looks pretty corroded. Spray it down good with penetrating oil before starting.
  17. A

    Evinrude 40 hp primer not working

    If not a key, how about a switch, safety cord, dead man switch ??
  18. A

    Johnson 2 Cyl 50 HP Manual Start

    A 50 hp manual start ? Your gonna have a good set of arms after getting that up and running !!
  19. A

    Biggest problem with boating?

    All the above and be courteous... learn to back up your trailer in a parking lot, not at the busy time at the launch ramp !! Backing up a trailer is not that hard, I taught all my kids in order to get there drivers license. With proper instruction, you will have it down pat in 30 min or less.
  20. A

    Looking for advice on fixing rivets on an 1983 aluminum boat

    Back in 1994 when I had a Mirro, my tag started with MMR and was labeled as a Mirro on the decal.
Top