Search results

  1. alldodge

    Pretty sure I was sent Gen VI, not Gen V 454

    CP Performance Mich Motorz Search for 502 marine intake rectangular port, it will also bring up oval but have to look close iBoats has pic upload problems and MODs are working on it. I/we hope to be able to put something out more about it soon
  2. alldodge

    Pretty sure I was sent Gen VI, not Gen V 454

    Looks like you might also need a different flywheel, unless your current is 454 Mag Your serial number list 2 different flywheels Gen V 7.4 used 811562T Gen V 454 Mag used 843374T1 Gen VI 502 used 843374T1
  3. alldodge

    Pretty sure I was sent Gen VI, not Gen V 454

    Will need new intake (rectangular port), probably re-jet current carb Yes they make carb intake for Gen VI rectangular ports
  4. alldodge

    Pretty sure I was sent Gen VI, not Gen V 454

    Welcome Might have been set a 454 Mag which would have 502 heads Look under the valve cover for last 3 numbers of 088 and 934 Gen VI 454 block has casting 12561357 or 10237297 (for L29)
  5. alldodge

    Could I have pooched a part of my ignition system?

    If points are closed, leaving key on will heat up the coil
  6. alldodge

    Could I have pooched a part of my ignition system?

    It shouldn't
  7. alldodge

    4.3 longer cranking after sitting few days n when hot

    Not VL, it's the carb and for me I would just live with it A carb sitting for a few days evaporates all the fuel from the bowl. When mine sat, I just crank for 10 seconds before even pumping throttle the first time. Then pump, set choke and try again, just a carb thing Now, once warm that can...
  8. alldodge

    Need help with adoption issues re: deceased parent

    From my non-legal view I agree
  9. alldodge

    1991 pcm nautique not able to crank after major flooding from carb

    Post 10 says nothing about that, and post 8 states all new
  10. alldodge

    1999 Volvo penta 5.7 GSI stuttering/cutting out - temp gage

    The temp gauge is a single Tan wire to sensor on Stat housing. Remove the wire and see if gauge goes to cold Check your fuel pressure on the high side of the pump, should be 29 +/- 2 psi
  11. alldodge

    8.1 Gi-G needing some guidance please

    Welcome I have never said this before but, you need to split this topic into 2 threads. This one is good for the VP 8.1 GI-G, but need to start another for the Merc 5.7 Tell us more about the boat and drive. How long have you had the boat and these issues? What is the fuel pressure at idle and...
  12. alldodge

    Lady in Blue #2 68 Holiday Build

    The MOD's have been trying to get the issue fixed but for couple weeks and so far no luck. We will keep trying
  13. alldodge

    Code spn 3217 fmi 5

    Something you could try, is swap sensors and see if fault moves to other side
  14. alldodge

    Code spn 3217 fmi 5

    Bank 1 is odd numbers (1,3,5,etc) so it's port side where cylinder 1 is
  15. alldodge

    1991 pcm nautique not able to crank after major flooding from carb

    They may not know what is causing it I bought a D3 dozer and it would only crank over slowly some years back, turned over slowly. I thought maybe new starter and such. To shorten the long story, I pulled the valve cover and saw rust. Ok, learned something but motor runs good now after I rebuilt it
  16. alldodge

    Mercruiser 3.0 140 dying out

    When shifting it might be the shift interrupter on the shift plate. The interrupter is used when coming out of gear to neutral. The dying issue right now appears to be more fuel so I would fix that first before adjusting shift, might just induce another problem.
  17. alldodge

    Code spn 3217 fmi 5

    Yes, that motor has Cat's The code numbers are for the most part standard based on engine type, based on my research. Example automotive code XXXX is the same across the auto industry. You have a GXI but didn't say anything after that. Have a VP manual listing codes for a GXI-F and it doesn't...
  18. alldodge

    Code spn 3217 fmi 5

    Looks like it's Bank 1 Sensor 1/ Bank 1 and same as DTC 0134 https://www.planetnautique.com/vb5/forum/nautique-topics/maintenance-technical-discussion/561548-diagnostic-message
  19. alldodge

    projects other than boats

    Electric Mikey Ryan posted about solid state Bat, and they are close to coming a reality.
  20. alldodge

    1991 pcm nautique not able to crank after major flooding from carb

    Fuel would not cause what your seeing Looks like a weak starter or bad battery cables or rust. A motor will not do what this one is doing without a major problem. Just because someone says it, doesn't mean its the truth. My guess is it wasn't winterized correctly last winter and water got in...
Top