Search results

  1. alldodge

    Need ideas on problem with 5.7L Mercruiser shutting down

    not 10 point, 10 pin connector It is at the rear of the motor on top. It's the engine harness connector and usually has a clamp keep it connected
  2. alldodge

    Need ideas on problem with 5.7L Mercruiser shutting down

    With gauges turning on means power from key is working No loud tone (alarm) means a connection to the motor is missing. Key sends power thru the 10 pin connector to motor. With no alarm this says the oil pressure switch has no connection coming back thru the 10 pin connector. Unable to crank...
  3. alldodge

    Pistons on Ford 302 / Mercruiser 188

    Could have come from a Ford truck/auto or Crusader years ago
  4. alldodge

    Mercruiser 165 alternator mashup?

    Your ALT should be part number 78403A2 which is item 11 https://www.mercruiserparts.com/bam/subassembly/30959/1605/2 Never use Auto ALT on a boat It's no long made by Merc but can be found easy just search "Mercruiser 78403A2" and some will show up. Amazon has one for $140 but suggest going...
  5. alldodge

    Companies who ship outboards

    Have you contacted UPS? They say they can package up to 150 pounds and 108 inch in length
  6. alldodge

    Battery Switch, Low Voltage, Crownline w/ Mercury

    Welcome The Verado uses a lot of current and manual states to use only AGM batteries 1000 CCA Min (I have two V8 Verado's). The house Bat can be something another type so long as your shore power charger is compatible. The selector switch should not be placed combine (both) mode. If one Bat...
  7. alldodge

    Alternator

    Your link doesn't work
  8. alldodge

    Need ideas on problem with 5.7L Mercruiser shutting down

    Have a bad connection which may have heated up and broke connection, and may be hard to find. Going to need it to do it again to find issue most likely. When key is turned on did gauges turn on or hear anything?
  9. alldodge

    Honda BF60A stumbles at high speed

    I found a post listing 40 psi https://www.marineengine.com/boat-forum/threads/honda-bf60-efi-fuel-issues.441709/
  10. alldodge

    Honda BF60A stumbles at high speed

    Not a OB guy but being EFI I would think something is clogged or a fuel pump (low/high) has an issue. Try to find the fuel rail feeding the injectors and connect a gauge
  11. alldodge

    Bravo 3 loss of lube oil - slowly then rapidly x2

    Agree with Dubs, it leaking that much I would look at the hose and fittings between transom and drive https://www.mercruiserparts.com/bam/subassembly/30971/952/180
  12. alldodge

    4.3 GL-C - Distributor clamp bolt

    Allen wrench with a hole drilled Search "Tamper resistant hex wrench" then find size 7/32, and do replace it California requirements
  13. alldodge

    winterizing a mercruiser 3.0 with sterndrive kept in water year round

    Need a marine safe heater. Something as simple as a incandescent 60watt bulb will keep the engine room warm. That said if there is any fumes in there and the bulb breaks there could be an explosion The blue hoses sounds like they go to a air pump connection on top. There is a hand pump used...
  14. alldodge

    winterizing a mercruiser 3.0 with sterndrive kept in water year round

    Welcome What are the 2 hoses your talking about for draining? Only way to do that and be safe is put a heater in the boat. I'm on the KY/TN line and it gets cold enough at times to freeze things pretty solid.
  15. alldodge

    Boat wont start

    On top the motor If you have 3 square relays then one of them is the slave relay If you have 2 square relays then the slave relay looks like pic
  16. alldodge

    Volvo 1000530 Cylinder Head Torque Specs

    Welcome I don't have a 125 manual, just a 120B/140A. Head bolt torque list 110 Nm or 8.1 Ft Lb in 2 passes
  17. alldodge

    DPS Lower Water Leak and Prop Shaft Play

    I was able to look up the parts breakdown in link below but still not able to find service manual. Hope Muc can assist https://www.volvopentastore.com/
  18. alldodge

    DPS Lower Water Leak and Prop Shaft Play

    Hey @muc can you assist?
  19. alldodge

    DPS Lower Water Leak and Prop Shaft Play

    This is where I would go, they want the serial number or product number https://www.volvopenta.com/en-us/service-and-support/your-engine/manuals-and-handbooks/
  20. alldodge

    DPS Lower Water Leak and Prop Shaft Play

    Welcome Looking at the vid it appears there was water or some other liquid inside the drive. If that is correct then pressure test is done incorrect, should be dry and only with air. Pressure should be no higher then 10 psi and lower is better Need to start with the manual for the drive...
Top