Search results

  1. Scott Danforth

    Which ECM

    Doubt it's the ECM. Check fuel pressure under load
  2. Scott Danforth

    LiFePO Batteries ???

    You spelled phuck'n wrong.... Sorry to hear about the alternator. Could just be a bad diode pack or regulator
  3. Scott Danforth

    Mechanical Safe Lock

    The 4 turns left are to reset all the discs. You are listening to click....click....click...click...squick..as the disc engages the next First one is easiest
  4. Scott Danforth

    Mechanical Safe Lock

    Use a stethoscope and turn slowly. We figured the combination to a safe my buddy bought.
  5. Scott Danforth

    Downsize Fuel Tank

    That's like cutting the roof off your car because you only drive it when it is sunny. As stated, you don't have to fill it up. BTW, add up the cost to remove your floor, buy a new tank, secure it, replace the floor...... Since you didn't want to spend a lot of money......
  6. Scott Danforth

    Gas electric generator issues

    im going to go with you put it away full of fuel and now need to go thru the whole fuel system from the tank to the carb. not idleing, or only running with the choke on is a plugged low-speed jet.
  7. Scott Danforth

    Coolant Disappearing, need help

    either you have a leak into the raw water side or the oil/combustion side. drain the coolant, do a pressure test. fix the issue.
  8. Scott Danforth

    Wealth preservation,....

    the ex got most of my financial nest egg..... I would have been out 4 years ago....
  9. Scott Danforth

    Broken Thermostat Housing Bolt

    a trick I learned years ago, similar to center drill. use a set of transfer punches to center punch the very center of the bolt. use a 1/16" drill bit to start drilling the bolt. once the hole is about 1/8" deep. switch to left handed drill bits, starting with 1/8" then going larger if...
  10. Scott Danforth

    daily music fix

    One of my crew is camping in tallulah gorge this weekend He was born in the 80's, but this is what came to mind.
  11. Scott Danforth

    Mercruser 470/ 170 compatible parts

    Not in this case. The only thing Ford on the Mercruiser 470 is the head (modified with a big ole hole), pistons and rods. Everything else is GM or custom Mercruiser. It's a Carter marine pump, similar to the 3.0 The Ford head gasket is for a closed deck
  12. Scott Danforth

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    the top of the hatched area should be the full mark. (about 3.5" below the pan rail)
  13. Scott Danforth

    MinnKota Powerdrive V2 Prop Not Turning

    there should never be water in there. my guess is the water was shorting out the trolling motor as well as corroding the brush
  14. Scott Danforth

    Thru hull

    use fast-cure UV-4000. also use painters tape on both sides as a dam to keep it from oozing into the bilge before its cured...... (dont ask how I know)
  15. Scott Danforth

    Just thought I'd share a nice photo.

    Hey @southkogs ..... that last pic would look great as a water-color similar to what was done with my boat pic
  16. Scott Danforth

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    nope, motor is designed like a p-trap. water will drain to the top of the thermostat housing at best unless you pull the block drains
  17. Scott Danforth

    Swap drives from one boat to another. How many day project?

    good work......now get that 120 into the truck
  18. Scott Danforth

    Water pump dripping 5.0 GL

    If it's the circulation pump (bolted to block) then replace before use. Dripping means the thing is soon to fail If it's the raw water pump (bolted to crank) then that one is easily rebuilt, and you can probably use it this weekend, however should repair or replace soon
  19. Scott Danforth

    Water pump dripping 5.0 GL

    Which pump? Raw water or circulation pump?
  20. Scott Danforth

    Question/Advice: Fiberglass over old Fiberglass In Bilge Area.

    24 or 36 grit for material removal. 40 or 60 grit for between layer prep. 80 grit for gel coat prep
Top