Search results

  1. alldodge

    Buying a boat

    In its day its a competition Salomon ski boat Unless you like to Ski with no wake why would you buy it?
  2. alldodge

    2008 3.0L thermostat housing sensors

    Correct on the first 2 Item 2 for Buzzer Item 24 for gauge Item 15 for is the TKS temp switch, which is part of the TKS carb control https://www.mercruiserparts.com/bam/subassembly/30908/13603/150 Also looks like you need a thermostat housing
  3. alldodge

    Mercruiser 3.0 - Block rust

    If you have not seen water, then it might have been just a bad paint job.
  4. alldodge

    Mercruiser inboard 4.3 - how to refit missing water heater (boiler)?

    Would help to know the serial number of the motor, and if its closed or open cool. This is one way
  5. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Red
  6. alldodge

    4.3 MPI Possible ECM issues

    The outputs are analog
  7. alldodge

    Honda BF15D will not stay running (Purchased Used)

    Not an OB guy, but seeing a bit of fuel on the water would not be surprising with a motor not running right. If its not burning all the fuel, as in flooding Look in to the carb, see if the fuel pump is working fuel pump
  8. alldodge

    Closed cooling diagram

    Yes, but most don't and I'm old. So my mistake and my fault
  9. alldodge

    4.3 MPI Possible ECM issues

    WOuld like to know if it changes any during the cycle. If the 5V circuit goes below 5V then it can throw all kinds of problems within the ECM. One bad sensor drawing to much current can throw things off
  10. alldodge

    4.3 MPI Possible ECM issues

    Something is overloading/overheating and tripping. While I'm all for watching real data, just don't see how you have enough time to see data to determine what is happening currently. Measure the 12V and 5V readings to see if they change any during the cycle. It may very well be the ECM but...
  11. alldodge

    4.3 MPI Possible ECM issues

    Has distributor cap been replaced?
  12. alldodge

    4.3 MPI Possible ECM issues

    If your saying FP now stays running when motor is running, or it still cycles on/off?
  13. alldodge

    Seadoo jet boat stalling

    The VIN is actually a HIN (hull ID number) but doesn't help with the motor Do see some gunk but not a lot
  14. alldodge

    preserve an used electric fuel pump for storage?

    Yes IMO Pumps lay on the storage shelves for years and are good. Only issue giving it many years of time would be rubber breaking down. Or if stored in humid area, rust
  15. alldodge

    Closed cooling diagram

    Bummer, its in the title and everything :(
  16. alldodge

    Closed cooling diagram

    Assuming open cool
  17. alldodge

    Seadoo jet boat stalling

    Not the fuel pump so much as the fuel lines might be collapsing internally. They may also be flaking pieces off. With it sitting so long it might have issues with gumming up from the old gas sitting so long. Don't know the serial number so unable to look up the parts. Check the fuel pressure
  18. alldodge

    Seadoo jet boat stalling

    Don't know enough bout the motor, but I would suggest taking the fuel system apart and clean it. Many of the old watercraft had issues with the fuel lines and they needed the lines replaced
  19. alldodge

    preserve an used electric fuel pump for storage?

    The fuel pump shouldn't have any fuel stay in it, it should all drain or evaporate out. They can get gummed up by old fuel staying in it in the lines connected to it
  20. alldodge

    4.3 MPI Possible ECM issues

    Having a 555 ECM means there is no paper clip option If it won't build pressure I would look at the fuel pressure regulator, item 13 https://www.mercruiserparts.com/bam/subassembly/31504/12839/60 Check fuel pressure at the rail, should read 43 psi. If fuel pressure is real low then it won't...
Top